- Sat Oct 17, 2015 8:33 am
#31588
@FlyingHacker
That said, upgrading from 1.5.something to 1.6.5 was the start of my problems. I am new to this forum and more importantly, new to Arduino and ESP programming. I struggled to get the IDE installed satisfactorily with 1.5.x, then I started with the ESP8266-12 modules and needed to add ESPTool. Eventually all was well and I have been developing and flashing up to 4 boards quite happily with 1.5.x and ESPtool as many as 5 - 10 times a day. 2 Boards are sat chatting to an Arduino Mega2560, but the other 2 are continually flashed with software mods.
I decided now to explored OneWire devices and in the process of adding OneWire and Dallas libraries I thought it would be good to update to 1.6.5 with a core that included some of the ESP library wherewithall I'd need. Everything continued fine until one day I connected the Mega2560 board to the laptop top program, up until then it had always been connected to my desktop using 1.6.5. At this point, selecting board as Mega created a number of options in the <Tools> menu ... Flash Mode, Flash Frequency, Upload Frequency, and Flash Size I don't ever recall seeing before. and installing the IDE core means that my ESPTool has gone.
I then found that uploading creates regular errors of incorrect connection for TX/RX or port unavailable. Tried installing ESPTool.py but that didn't improve matters and I doubt that it was the means of uploading.
Since then things have gone from bad to worse as I created a new Ubuntu install and added Arduino 1.6.5 IDE and the necessary libraries to find that uploading was instantly successful but the sketch does not run. Using a second working board gave the exact same outcome after the firat flah so now I have (possibly) 2 non functioning ESP boards. What's going on? Is it the recent IDE or libraries? Could it be the built-in substitute ESPTool that is flawed? I'm afraid this is outside my capabilities, but maybe some out there can shed some light ... maybe abandon the IDE for a different development/programming application.
