-->
Page 1 of 7

Battery Power Fundamentals

PostPosted: Thu Feb 05, 2015 7:06 am
by ChrixXenon
I want to battery-power a Thing.

LiPo seems the obvious choice - being closest to the 3.3v needed, but I need to step it down (and up?) and regulate it to 3,3v need from the 3.2 - 4.0 volts which LiPos deliver throughout their charge range. Even if LiPos are not the best choice - there is a need to convert and stabilise fluctuating voltage around 3v - 6v to 3.3v.

The so-called high efficiency digital regulators I have burn 17mA with nothing connected to them - so they are immediately ruled out.

Is there a clear winner product for this scenario?

Re: Battery Power Fundamentals

PostPosted: Thu Feb 05, 2015 7:36 am
by miker
I'm using aTPS61200DRCT to boost and regulate the power from a lipo with good luck so far. Attached is the schematic.
http://www.digikey.ca/product-detail/en/TPS61200DRCT/296-21663-1-ND/1534252

Re: Battery Power Fundamentals

PostPosted: Thu Feb 05, 2015 7:41 am
by reaper7
Personally I use 18650 accu -> TI TPS73633 LDO -> ESP8266 +BMP180+SHT21+INA219
deepsleep mode and every 5mins upload data to thingspeak

Re: Battery Power Fundamentals

PostPosted: Thu Feb 05, 2015 11:14 am
by alonewolfx2
reaper7 wrote:Personally I use 18650 accu -> TI TPS73633 LDO -> ESP8266 +BMP180+SHT21+INA219
deepsleep mode and every 5mins upload data to thingspeak


can you share your schematic? TPS73633 seems very usefull