ESP8266 Community Forum

Hi all,
I'm just playing with the ESP8266 WiFi module and I'm able to send or request data to/from webserver on internet.
The next thing I woul like to do, is to connect to the ESP8266 from the internet (with a web browser), just to do a local server on the ESP8266 that can be accessed from the Internet. I tried in several manner but I hadn't no luck, can someone hel me on this?
Regards to all

have you tried the basic port forwarding from you router?

Here basic port forwarding. If using mobile broadband, please note that in many countries mobile connections do not have open ports, I mean end user is behind carrier NAT and it's not IoT-hobby friendly:
http://superuser.com/questions/753754/n ... forwarding

But some operators are offering fixed ip or NAT'less subscription if pay extra

Thank you to you all. I solved the problem like you claimed with the port forwarding.
In the beginning, I made a mistake because I started the ESP8266 in access point / standard mode (CWMODE=3), so I had two IP adresses, the first one of the AP (192.168.4.1) that I think it is fixed and cannot be changed, the other one IP address 192.168.0.X (local to my home network).
So I was confused regarding the IP to use, the first or the second? Moreover, I was just done the port forwarding, but on the router I opened one port (XXXX) and the request from internet was made to the ESP8266 server on another port (YYYY), so the port forwarding could not be done. Now, I started the ESP8266 in standard mode only (CWMODE=1) and I made the request to right ESP8266 server port and all worked well. Now, I have another question regarding the SDK, but I think this is not the right section, I will post it on another place.
For the moment thank you and I hope this experience may be good for someone other.