ESP8266 Community Forum

Posted: **Thu Jun 21, 2018 9:46 pm**

i've been working on a project that im using an esp8266 nodemcu-01 as described in the title, and i've been having some headache with this module, first because after searching i figured out that the commands LOW and HIGH are inversed as in LOW outputs 3.3v e HIGH outputs low tension, so i began to grow worried about the possibility that other programming resources may follow the same situation. But with that problem a part, i've been trying a few different codes including the one found in the sketchbook examples and still couldn't connect.

Also another weird problem, is that i was working working with the baudrate set on the arduino IDE settings on 115200, and so is the Serial.begin, that is also set to 115200, however i can only read properly the continuous dot that is contained in the while loop "........." when i set it to 74880, which another thing that i was trying to understand. I also forgot to mention that it keeps spamming dots but does not connect at all.

And to conclude, my problem resumes in not being able to connect to any wifi i've tried, i tried my friend's home and also 4g, both did not work, here's the code, which we tried first:

Code: Select all

    #include <ESP8266WiFi.h>
    
    char* ssid = "Net Wi-fi";
    char* password = "testingtest";
    // 
    void setup() {
      WiFi.begin(ssid, password);
      Serial.begin(115200);
      while(WiFi.status()!=WL_CONNECTED)
      {
        Serial.print("Conecting");
        delay(500);
      }
      Serial.println("");
      Serial.print("IP:");
      Serial.print(WiFi.localIP());
    }
     
    void loop(){

This was the original try, using the arduino sketch example:

Code: Select all

    #include <ESP8266WiFi.h>
    #include <WiFiClient.h>
    #include <ESP8266WebServer.h>
    #include <ESP8266mDNS.h>
    
    const char* ssid = "Net6271";
    const char* password = "megaman"; 
    
    ESP8266WebServer server(80);
    
    const int led = 13;
    
    void handleRoot() {
      digitalWrite(led, 1);
      server.send(200, "text/plain", "hello from esp8266!");
      digitalWrite(led, 0);
    }
     
    void handleNotFound(){
      digitalWrite(led, 1);
      String message = "File Not Found\n\n";
      message += "URI: ";
      message += server.uri();
      message += "\nMethod: ";
      message += (server.method() == HTTP_GET)?"GET":"POST";
      message += "\nArguments: ";
      message += server.args();
      message += "\n";
      for (uint8_t i=0; i<server.args(); i++){
        message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
      }
      server.send(404, "text/plain", message);
      digitalWrite(led, 0);
    }
    
    void setup(void){
      pinMode(led, OUTPUT);
      digitalWrite(led, 0);
      Serial.begin(115200);
      WiFi.mode(WIFI_STA);
      WiFi.begin(ssid, password);
      Serial.println("");
    
      // Wait for connection
      while (WiFi.status() != WL_CONNECTED) {
        delay(500);
        Serial.print(".");
      }
      Serial.println("");
      Serial.print("Connected to ");
      Serial.println(ssid);
      Serial.print("IP address: ");
      Serial.println(WiFi.localIP());
    
      if (MDNS.begin("esp8266")) {
        Serial.println("MDNS responder started");
      }
    
      server.on("/", handleRoot);
    
      server.on("/inline", [](){
        server.send(200, "text/plain", "this works as well");
      });
    
      server.onNotFound(handleNotFound);
    
      server.begin();
      Serial.println("HTTP server started");
    }

void loop(void){
server.handleClient();
}

Board setting: Generic ESP8266 Module.
Crystal Frequency: 40MHz.
Flash Frequency: 80Mhz.
Upload Speed: 115200.
Flash Mode: DIO.
Flash Size: 512k no SPIFFS.

pls help.

ESP8266 Community Forum

Trouble connecting to the wifi using nodemcu esp8266-01

Trouble connecting to the wifi using nodemcu esp8266-01