Sonoff basic with touch module is not working
Posted: Tue Jul 10, 2018 4:34 pmHello
I connected a sonoff basic to TTP223 capacitive touch module. I am trying to make a smart light switch with the Sonoff Basic with a touch switch. It works well when I connect it directly to an outlet but when I connect it to the neutral and live wires with wire twisters, it starts to turn on and off by itself ( https://drive.google.com/file/d/1gQDfLR ... p=drivesdk ) I tried to connect a pull down resistor on GPI014 (Signal) and ground to get rid of excess voltage going through the wires(I connected a 30nf capacitor and a 82K resistor). I know something is happening in something happens in the switch box. If you have ideas if what might be happening please reply.
I connected a sonoff basic to TTP223 capacitive touch module. I am trying to make a smart light switch with the Sonoff Basic with a touch switch. It works well when I connect it directly to an outlet but when I connect it to the neutral and live wires with wire twisters, it starts to turn on and off by itself ( https://drive.google.com/file/d/1gQDfLR ... p=drivesdk ) I tried to connect a pull down resistor on GPI014 (Signal) and ground to get rid of excess voltage going through the wires(I connected a 30nf capacitor and a 82K resistor). I know something is happening in something happens in the switch box. If you have ideas if what might be happening please reply.