Connect ESP2866 with the FeatherWing OLED
Posted: Tue Sep 17, 2019 8:44 pmHi,
I am attempting to follow these instructions to connect my ESP2866 with the FeatherWing OLED: https://learn.adafruit.com/adafruit-ole ... thon-setup
"Before continuing make sure your board's lib folder or root filesystem has the adafruit_ssd1306.mpy, adafruit_bus_device and adafruit_framebuf files and folders copied over."
I have used ampy to transfer adafruit_ssd1306.mpy, adafruit_bus_device and adafruit_framebuf files from the CircuitPython 5.0x lib folder: https://circuitpython.org/libraries
I can use ampy ls to see that all of these files are loaded onto the ESP8266.
When I use Putty to import the libraries, I get an error saying incompatible .mpy file which points to the ss1306.mpy file.
Any help would be appreciated.
I am attempting to follow these instructions to connect my ESP2866 with the FeatherWing OLED: https://learn.adafruit.com/adafruit-ole ... thon-setup
"Before continuing make sure your board's lib folder or root filesystem has the adafruit_ssd1306.mpy, adafruit_bus_device and adafruit_framebuf files and folders copied over."
I have used ampy to transfer adafruit_ssd1306.mpy, adafruit_bus_device and adafruit_framebuf files from the CircuitPython 5.0x lib folder: https://circuitpython.org/libraries
I can use ampy ls to see that all of these files are loaded onto the ESP8266.
When I use Putty to import the libraries, I get an error saying incompatible .mpy file which points to the ss1306.mpy file.
Any help would be appreciated.