ESP8266 Community Forum

Good day,
so I got a D1 mini lite.
I put a simple program on and noticed, something isn't right. With D2 pulled up and D3 on low, both of them do have 2V on them. On further inspection it seems, D2, D3 and D4 are shorted. All other pins do have their 3.3V. The board itself is working fine besides that.

So my question is: Is there anything I can do to fix that?

Are those 3 pins physically shorted? I mean when you do not power up your board, and perform continuity test with a multimeter, do you still find those shorted?

Yes.