Switch from LUA to AT Commands
Posted: Mon Oct 16, 2017 7:58 amI have used 2 or 3 ESP8266's before and even updated the firmware on one.
I recently got a ES8266 wifi shield (for Uno/Mega, with the 4 pin switch block with 'DFU' Led on pin 4... hope that is recognisable).
As soon as I powered it up it began transmitting nonsense at an unknown speed. Long story short, the vendor sent me instructions to update using Nodemcu. It did not work but I managed to download latest Nodemcu and naively installed it and now I seem to be running LUA 5.1.6 and I get a '>' when powered up (on Putty).
I just want to use simple AT commands. !!!!!!!!!
Can anyone please explain how to get back to that ???????
I have tried loading
C:\Users......\ESP8266_NONOS_SDK-master\ESP8266_NONOS_SDK-master\bin\esp_init_data_default.bin
C:\Users......\ESP8266_NONOS_SDK-master\ESP8266_NONOS_SDK-master\bin\blank.bin
C:\Users......\ESP8266_NONOS_SDK-master\ESP8266_NONOS_SDK-master\bin\boot_v1.7.bin
C:\Users......\ESP8266_NONOS_SDK-master\ESP8266_NONOS_SDK-master\bin\at\512+512\user1.1024.new.2.bin
but the ESP8266 Download Tool V3.6.1.0 will always FAILs to sync.
Given my searches I seem to be the only person wanting to go back to AT command set.
Thanks
I recently got a ES8266 wifi shield (for Uno/Mega, with the 4 pin switch block with 'DFU' Led on pin 4... hope that is recognisable).
As soon as I powered it up it began transmitting nonsense at an unknown speed. Long story short, the vendor sent me instructions to update using Nodemcu. It did not work but I managed to download latest Nodemcu and naively installed it and now I seem to be running LUA 5.1.6 and I get a '>' when powered up (on Putty).
I just want to use simple AT commands. !!!!!!!!!
Can anyone please explain how to get back to that ???????
I have tried loading
C:\Users......\ESP8266_NONOS_SDK-master\ESP8266_NONOS_SDK-master\bin\esp_init_data_default.bin
C:\Users......\ESP8266_NONOS_SDK-master\ESP8266_NONOS_SDK-master\bin\blank.bin
C:\Users......\ESP8266_NONOS_SDK-master\ESP8266_NONOS_SDK-master\bin\boot_v1.7.bin
C:\Users......\ESP8266_NONOS_SDK-master\ESP8266_NONOS_SDK-master\bin\at\512+512\user1.1024.new.2.bin
but the ESP8266 Download Tool V3.6.1.0 will always FAILs to sync.
Given my searches I seem to be the only person wanting to go back to AT command set.
Thanks