ESP8266 Community Forum

Posted: **Thu Mar 02, 2017 5:50 am**

Hi
I want change this code add some thins , for example add Serial.print function but every time I got error

!

#include <SPI.h>
#include <MFRC522.h>
#include <ESP8266WiFi.h>
#include <ESP8266WebServer.h>
#include <DNSServer.h>
#include <WiFiManager.h>

WiFiClient client;
ESP8266WebServer server(80);
String Argument_Name, Clients_Response1, Clients_Response2;

#define SS_PIN D4
#define RST_PIN D2
MFRC522 rfid(SS_PIN, RST_PIN); 
void printHex(byte *buffer, byte bufferSize) {
  for (byte i = 0; i < bufferSize; i++) {
    Serial.print(buffer[i] < 0x10 ? " 0" : "");
    Serial.print(buffer[i], HEX);}
  }




void HandleClient() {
  server.send(200, "text/html", "test page");
}

void setup() {
  Serial.begin(115200);
  SPI.begin();
  rfid.PCD_Init();
  WiFiManager wifiManager;
  wifiManager.setTimeout(180);
  if (!wifiManager.autoConnect("ESP8266_AP")) {
    Serial.println("failed to connect and timeout occurred");
    delay(3000);
    ESP.reset(); //reset and try again
    delay(5000);
  }
  Serial.println("WiFi connected..");
  server.begin(); Serial.println("Webserver started..."); 
  Serial.print("Use this URL to connect: http://");
  Serial.print(WiFi.localIP()); Serial.println("/");
  Serial.println("teette");
  server.on("/", HandleClient); 
  
 Serial.print("errorrrrr"); \\got error this line 

}
void loop() {
  server.handleClient();
  if (!rfid.PICC_IsNewCardPresent()) return;
  if (!rfid.PICC_ReadCardSerial()) return;
  printHex(rfid.uid.uidByte, rfid.uid.size);
  Serial.println();
  rfid.PICC_HaltA(); 

Serial.print("errorrrrr"); \\or this one  
}

thank you

Posted: **Sat Mar 04, 2017 7:46 am**

I think the problem is rc522 code , because when comment the rfid code it run normally!
I dont know the problem ?!!

Code: Select all

#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <ESP8266mDNS.h>
#include <SPI.h>
#include <MFRC522.h>

#define SS_PIN 10
#define RST_PIN 9
byte nuidPICC[4];
String uid="";
int i=0;

const char* ssid = "-";
const char* password = "-";
//MFRC522 rfid(SS_PIN, RST_PIN); // Instance of the class
//MFRC522::MIFARE_Key key;

ESP8266WebServer server(80);

void handleRoot() {
  server.send(200, "text/plain", "uid");
}

void handleNotFound() {
  String message = "File Not Found\n\n";
  message += "URI: ";
  message += server.uri();
  message += "\nMethod: ";
  message += (server.method() == HTTP_GET) ? "GET" : "POST";
  message += "\nArguments: ";
  message += server.args();
  message += "\n";
  for (uint8_t i = 0; i<server.args(); i++) {
    message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
  }
  server.send(404, "text/plain", message);
}


void setup() {
  Serial.begin(115200);
  WiFi.begin(ssid, password);
  Serial.println("");
  // Wait for connection
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.print("Connected to ");
  Serial.println(ssid);
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

  if (MDNS.begin("esp8266")) {
    Serial.println("MDNS responder started");
  }
  server.on("/", handleRoot);

  server.on("/inline", []() {
    server.send(200, "text/plain", "this works as well");
  });

  server.onNotFound(handleNotFound);

  server.begin();
  Serial.println("HTTP server started");
//  SPI.begin(); 
//  rfid.PCD_Init(); 

  
}

void loop() {
  
  //if (!rfid.PICC_IsNewCardPresent() || !rfid.PICC_ReadCardSerial())
  //  return;
  //uid = "";
  //for (byte i = 0; i < 4; i++) {
  //  nuidPICC[i] = rfid.uid.uidByte[i];
  //  uid += String(rfid.uid.uidByte[i], HEX);
  //}
  ////printHex(rfid.uid.uidByte, rfid.uid.size);
  //uid.toUpperCase();
  //Serial.println("uid : " + uid);
  //rfid.PICC_HaltA();

}

Posted: **Sun Apr 02, 2017 2:21 pm**

The problem is the reset pin when it disconnected, Esp8266 print the RFID serial well.

ESP8266 Community Forum

error rc522 with Nodemcu v1.0 (esp826612E)

error rc522 with Nodemcu v1.0 (esp826612E)

Re: error rc522 with Nodemcu v1.0 (esp826612E)

Re: error rc522 with Nodemcu v1.0 (esp826612E)