Re: LAPTOP PROGRAMMING ESP8266 PROBLEM?
Posted: Tue Nov 02, 2021 3:26 pm
Since your code works when it's flashed from your PC, it means your board and cable are in working condition. Perhaps you should re-configure your laptop and try again. If you cannot pinpoint the error, Try reinstalling everything.
And also if you are using any external hubs and connectors, make sure they are in working condition as well. Also make sure your laptop's USB ports are clean and connections are not loose and shaky.
Also make sure you have installed the proper drivers for your laptop to recognize your board:
https://github.com/nodemcu/nodemcu-devkit/tree/master/Drivers
These are the first troubleshooting steps I would take. I recommend watching a YouTube video tutorial if these steps don't work. Hope this answer was helpful. Good Luck!
And also if you are using any external hubs and connectors, make sure they are in working condition as well. Also make sure your laptop's USB ports are clean and connections are not loose and shaky.
Also make sure you have installed the proper drivers for your laptop to recognize your board:
https://github.com/nodemcu/nodemcu-devkit/tree/master/Drivers
These are the first troubleshooting steps I would take. I recommend watching a YouTube video tutorial if these steps don't work. Hope this answer was helpful. Good Luck!