ESP8266 Community Forum

Trying to connect STM32F103 to ESP-12F via SPI
STM32F103 as master, and ESP-12F in slave mode.

I found this library https://github.com/esp8266/Arduino/tree/master/libraries/SPISlave

Actually, this example is loaded into the ESP-12F as is https://github.com/esp8266/Arduino/blob ... e_Test.ino

When I send the string "Hello Slave!" from the master side.
ESP-12F to COM port instead of the expected "Question: Hello Slave!" writes "Status Sent!" sometimes ""Question:" with some garbage.

I looked with a logic analyzer what is happening on the bus, everything seems to be fine.
Picture from the logic analyzer:


What am I doing wrong?

Hello, are you selecting 115200 baud rate when opening the serial monitor?

Of course Text "Status Sent!" displayed correctly ....
The problem is that the branch with receiving data from SPI does not work.