Set ESP8266 to station mode only?
Posted: Tue Dec 15, 2015 9:35 pmHello everyone,
I am having trouble setting my ESP8266 to station mode. I have already set the default WIFI mode to station mode using AT command AT+CWMODE=1. However, when I load my program using the Arduino IDE, an ESP8266 access point appears.
I am having trouble setting my ESP8266 to station mode. I have already set the default WIFI mode to station mode using AT command AT+CWMODE=1. However, when I load my program using the Arduino IDE, an ESP8266 access point appears.
Code: Select all
#include <OneWire.h>
#include <ESP8266WiFi.h>
void setupTemp(void);
void getTemp(void) ;
String APIkey = "RQFT5KELVIA8HGRP";
const char* ssid = "G2_8792";
const char* password = "123456789";
const char* host = "api.thingspeak.com";
const int httpPort = 80;
//float otemp;
float temp;
//DHT dht(DHTPIN, DHT11,15);
WiFiClient client;
void setup() {
Serial.begin(115200);
setupTemp();
delay(10);
WiFi.begin(ssid, password);
Serial.println();
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
Serial.print("The temperature is: ");
getTemp();
Serial.println(temp);
Serial.print("The temperature is: ");
getTemp();
Serial.println(temp);
}
void loop() {
//=====================================================================================================================
Serial.print("connecting to ");
Serial.println(host);
// Use WiFiClient class to create TCP connections
//WiFiClient client;
if (!client.connect(host, httpPort)) {
Serial.println("connection failed");
return;
}
getTemp();
Serial.println(temp);
// We now create a URI for the request
String url = "/update?key=";
url += APIkey;
url += "&field1=";
url += String(temp);
Serial.print("Requesting URL: ");
Serial.println(url);
Serial.print(String("GET ") + url + " HTTP/1.1\r\n" +
"Host: " + host + "\r\n" +
"Connection: close\r\n\r\n");
// This will send the request to the server
client.print(String("GET ") + url + " HTTP/1.1\r\n" +
"Host: " + host + "\r\n" +
"Connection: close\r\n\r\n");
client.stop();
delay(10);
// Read all the lines of the reply from server and print them to Serial
//while (client.available()) {
// String line = client.readStringUntil('\r');
// Serial.print(line);
//}
Serial.println();
Serial.println("closing connection");
//delay(26800);
delay(2680);
}