ESP8266 Community Forum

- Sat May 20, 2017 4:05 am #66115 Good morning

recently i hooked up an ESP12 in STA mode to a ADSL router .When i start ESPBASIC it gives me the following MAC ADRESS :
1A:FE:34:E5:13:C7

however when i scan the network using IPSCANNER the mac adress for the ESP is
18:FE:34:E5:13:C7

for what reason i did not get the same value ?

- Sun May 21, 2017 7:23 am #66150 There is one MAC address for the access point mode, another for client mode.

- Mon May 22, 2017 5:18 am #66178 If you read what the guy has written...

recently i hooked up an ESP12 in STA mode to a ADSL router .When i start ESPBASIC it gives me the following MAC ADRESS :
1A:FE:34:E5:13:C7

however when i scan the network using IPSCANNER the mac adress for the ESP is
18:FE:34:E5:13:C7

it seems obvious he isn't speaking about 2 different MAC addresses - he's reporting a discrepency in the second digit of the MAC address... most likely a bug as he points out, and one which many people would probably not even notice let alone mention.

Where to get modules?

https://www.banggood.com/custlink/KvGGhGF4wG

- Mon May 22, 2017 8:07 am #66182 I read somewhere, that AP and STA mode MAC addresses must be different. http://bbs.espressif.com/viewtopic.php?t=601
Imho one bit difference should be good enough, but I am not a networking guru, mostly a rookie.