ESP8266 Community Forum

- Thu Jan 07, 2016 5:19 am #38121 Hello, i have a problem with the OTA Update, with the Default URL woks this, whit my own not

if use http://192.168.0.21/firmware/ESP8266Basic.bin then get follow error

ShowMenueBar
otaUrl
Update failed
Starting Default Program
Done...

without "http://" the crash the Program.

mfg sandfrog

Edit: Server say Request is ok

192.168.0.37 192.168.0.21 - [07/Jan/2016:11:34:06 +0100] "GET /firmware/ESP8266Basic.bin HTTP/1.1" 200 21714 "-" "ESP8266-http-Update"
192.168.0.37 192.168.0.21 - [07/Jan/2016:11:34:50 +0100] "GET /firmware/ESP8266Basic.bin HTTP/1.1" 200 21714 "-" "ESP8266-http-Update"
192.168.0.37 infrastruktur-frendlyarm.fritz.box - [07/Jan/2016:11:36:33 +0100] "GET /firmware/ESP8266Basic.bin HTTP/1.1" 200 21714 "-" "ESP8266-http-Update"
192.168.0.37 infrastruktur-frendlyarm.fritz.box - [07/Jan/2016:11:36:47 +0100] "GET /firmware/ESP8266Basic.bin HTTP/1.1" 200 21714 "-" "ESP8266-http-Update"
192.168.0.37 192.168.0.21 - [07/Jan/2016:11:59:16 +0100] "GET /firmware/ESP8266Basic.bin HTTP/1.1" 200 17334 "-" "ESP8266-http-Update"
192.168.0.37 192.168.0.21 - [07/Jan/2016:11:59:31 +0100] "GET /firmware/ESP8266Basic.bin HTTP/1.1" 200 21714 "-" "ESP8266-http-Update"

- Thu Jan 07, 2016 7:31 am #38130 What size moduel are you using. If it is a 512k or 1m moduel ota will never work.

Serial terminal in the chrome browser see https://serialTerminal.com

http://esp8266basic.com
A BASIC interpreter for your ESP

Working now on Autodrop3d. A 3d printer with automatic part ejection system. https://autodrop3d.com

- Thu Jan 07, 2016 8:22 am #38134 i Have 4M/32Mbit, i use follow settings:



EDIT:Ok, i have test this whit the "NodeMCU 0.9 ESP-12" this Work, i have upgrade my ESP07 Module whit a W25Q32FVSSIG Flash, i have no idea what different is on this Setting.