ESP8266 Community Forum

- Thu Sep 27, 2018 7:29 pm #78418 I was playing with AT commands to set up transparent serial link, Also playing with AT+SAVETRANSLINK command, device came back after reset really messed up. FIrst, TX and RX pins reversed on UART. Second, Baud rate went to 70000K...???? Then it started spewing this after each boot; esp8266 cause:1, boot mode:(3,0) along with some other goo....

+++ does not recover it, AT+SAVETRANSLINK=0 does not recover it, it will NOT flash anymore. Really unhappy ESP device....