ESP8266 Community Forum

- Sat Jun 06, 2015 2:01 pm #19669 Hi,

The problem is that I try to connect two ESP8266, one operate in Station mode and the second in AP mode. The problem is that, sometimes the connection is made, also I can send and receive data, however, it is lost and I cannot connect again, I'll describe the procedure:

1:

Code: Select allAT+CWMODE=1

OK

AT+RST

OK

 ets Jan  8 2013,rst cause:4, boot mode:(3,7)

wdt reset
load 0x40100000, len 816, room 16
tail 0
chksum 0x8d
load 0x3ffe8000, len 788, room 8
tail 12
chksum 0xcf
ho 0 tail 12 room 4
load 0x3ffe8314, len 288, room 12
tail 4
chksum 0xcf
csum 0xcf

2nd boot version : 1.2
  SPI Speed      : 40MHz
  SPI Mode       : QIO
  SPI Flash Size : 4Mbit
jump to run user1

rl\0x8e\0x82\0xff
Ai-Thinker Technology Co. Ltd.

ready
AT+CIPMUX=1

OK
AT+CIPSERVER=1

OK
AT+CIFSR

+CIFSR:STAIP,"172.168.0.40"
+CIFSR:STAMAC,"18:fe:34:98:3a:4f"

OK


2:

Code: Select allOK
AT+CWMODE=2

OK
AT+RST

OK

 ets Jan  8 2013,rst cause:4, boot mode:(3,7)

wdt reset
load 0x40100000, len 816, room 16
tail 0
chksum 0x8d
load 0x3ffe8000, len 788, room 8
tail 12
chksum 0xcf
ho 0 tail 12 room 4
load 0x3ffe8314, len 288, room 12
tail 4
chksum 0xcf
csum 0xcf

2nd boot version : 1.2
  SPI Speed      : 40MHz
  SPI Mode       : QIO
  SPI Flash Size : 4Mbit
jump to run user1

r\0x18\0x02\0x8e\0x1b\0xd1
Ai-Thinker Technology Co. Ltd.

ready
AT+CIPSTART="TCP","173.168.0.40",333

ERROR
CLOSED


In both the AT+GMR output is:

Code: Select allAT+GMR

AT version:0.21.0.0
SDK version:0.9.5

OK


Thanks for help!

PD: I'm so sorry for my bad english.

- Wed Jun 10, 2015 6:58 am #20035 In another forum solve my problem, below I paste the link to the thread.

http://bbs.espressif.com/viewtopic.php?f=16&t=575&sid=d93d21fdbe9211230634c93d879b173a

Thanks.

- Sat Jul 23, 2016 5:01 am #51325 Thanks！