ESP8266 Community Forum

Hi guys,
will inform you, that new ESP-12 will be at Saturday in Test and after week testphase next time on market.
Modules are made in Gemany
With this modul is going on to try to get FCC and more. Sorry for short info. Will update next time here with more info.
The first thread was make in german forum mikrocontroller.net.
http://www.mikrocontroller.net/topic/34 ... 10#3863610
So perhabs is a good idea if someone can read german and translate the data technical next time, this would be helpfull.
I am not so good in this.
Hope you guy's are hear this as welcome i am very happy about this, now, ADC, GPIO4, GPIO5 are can used normaly at Pinheader
with RM 2.54. U-FL will be a gift and the ANT PIN is here too. price for this module will update asap.
Hope you can find a good work on it too.
Attached is the ESP-12 as Layout.
The Modules are just in time in produktion, some will tested at this saturday.
You are the second Forum that i informed.
Best wishes!
rudi

Looks exactly like the kind of module I was after, though I prefer chip / PCB antenna.

Shipping should be pretty fast/cheap from Germany to UK so I am definitely interested.

Do you not need an on board antenna, shield and possibly power regulator for FCC?

thanks for welcome and reply

i will asap inform with infos. let make the testphase at saturday - will write again all infos here.
short infos:
german:
berechnet werden die traces mit txline.
-die antenne ist single ended auf 50r verlegt.
-board is 1mm,
-42 um kupfer,
-12um lotstopp mit Er(Epsilon r) von 3.5,
- das Er vom FR4 ist mit 4.2 bei 2.4 GHz angenommen,

try to translate in english

be calculated with the traces txline.
-the antenna is single ended relocated to 50r.
-board is 1mm,
-42 um copper,
-12um Braze with He (epsilon r) of 3.5,
- the Er from the FR4 is assumed to be 4.2 at 2.4 GHz,

hope this helps

best wishes rudi

rudi wrote:Hi guys,
will inform you, that new ESP-12 will be at Saturday in Test and after week testphase next time on market.
...
You are the second Forum that i informed.

As is, this post is only commercial promotion. You do not give us chanse for any feedback, no schematic, no PCB route layot, no sample C code.

koliqi