ESP8266 Community Forum

- Tue Nov 17, 2015 6:14 am #34288 Hello,

I am experiencing some problems with the AT commands. When I pass eg. the command AT+RST to the esp8266, I receive the following response :


AT

busy p/..

OK


Command AT+RST gives this response :

b]®^‚¹rr

OK
WIFI FIS¨ÊʪQ5

ets Jan  2013.rst ® ½
load 0x40100800, len 139;, roßm 16
taiv 4

chksum 8x88
load 0|3f0º
eeª
k
‹Í
šj•ª…)ª0ŒÕ(j5�!
-€9%1…

u
ø


So some of the text is ok, but strange characters appear. As some of the text can be read, I suppose this has nothing to do with the baudrate ? I am using an external power supply, and comminucate through softserial. I tried with several esp8266 modules, but all produce the same response. Does anyone know what is causing this problem ?

- Tue Nov 17, 2015 5:27 pm #34346 I had / have the same problem. I made my wiring more secure and had the power come straight from my arduino. This made the results more reliable but still not perfect. My thinking is to slow down the baud rate by changing the firmware giving both boards time to talk to each other.
I don't know if this helps