Updater Assistance
Posted: Fri Sep 22, 2017 7:37 amI'm having trouble getting the updater to properly update my sketch. I've created a very basic updater program to show what I'm doing in my real program and it has the same issue that it doesn't seem to work. Everything seems to work fine (no errors from Updater.h) but when it reboots it just goes into a boot loop.
Here is the example program that just hosts one webpage that asks to upload a file
Here is a link to a Hello World program that you can use to test the update (just repeats "Hello World" via serial once a second):
https://www.dropbox.com/s/nj7c6ix723pwo8e/HelloWorld.WeMos.160MHz.Flash4MB.SPIFFS1MB.bin?dl=0
EDIT: deleted compiled program that would have only worked with my SSID and password. Spelling
Here is the example program that just hosts one webpage that asks to upload a file
Code: Select all
#include <FS.h> //SPIFFS File system
#include <ESP8266WiFi.h>
#include "ESPAsyncTCP.h"
#include "ESPAsyncWebServer.h"
#define HTTPPORT 80
const char* ssid = "SSID";
const char* password = "PASSWORD";
AsyncWebServer HTTPserver(HTTPPORT);
void HTTPRoot(AsyncWebServerRequest *request) {
String w= F("\
Upload a simple test program<p>\n\
<form method='POST' action='/update' enctype='multipart/form-data'>\n\
<input type='file' accept='.bin' name='update' value='Select File'><p>\n\
<input type='submit' value='Upload and Update'>\n\
</form>\n");
AsyncResponseStream *response = request->beginResponseStream("text/html");
response->print(w);
request->send(response);
}
void update(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final) {
if (!index) { //UPLOAD Start
Serial.setDebugOutput(true);
Serial.printf("Update: %s\n", filename.c_str());
uint32_t maxSketchSpace = (ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000;
Update.runAsync(true);
if (!Update.begin(maxSketchSpace)) {//start with max available size
Update.printError(Serial);
request->send(200, F("text/html"), F("Error: Max size exceeded"));
}
} else if(final) { //Upload finished
Serial.println(F("File Finished Uploading"));
if (Update.end(true)) { //true to set the size to the current progress
Serial.print(F("Update Success: Restarting..."));
ESP.restart();
}
else {
Update.printError(Serial);
}
Serial.setDebugOutput(false);
}
//Write the Data to flash
if (Update.write(data, len) != len) {
Update.printError(Serial);
request->send(200, F("text/html"), F("Error: Updated size did not match file uploaded"));
}
Serial.print(".");
}//===============================================================================================
void setup()
{
Serial.begin(115200);
WiFi.begin(ssid, password);
Serial.printf("connecting to: %s\n\r", ssid);
if (WiFi.waitForConnectResult() != WL_CONNECTED) {
Serial.printf("STA: Failed!\n");
WiFi.disconnect(false);
delay(1000);
WiFi.begin(ssid, password);
}
Serial.print("connected:"); Serial.println(WiFi.localIP().toString());
HTTPserver.on("/", HTTPRoot);
HTTPserver.on("/update", HTTP_POST, [](AsyncWebServerRequest *request) {
request->send(200);
}, update);
HTTPserver.begin();
}
void loop()
{
//do nothing
}
Here is a link to a Hello World program that you can use to test the update (just repeats "Hello World" via serial once a second):
https://www.dropbox.com/s/nj7c6ix723pwo8e/HelloWorld.WeMos.160MHz.Flash4MB.SPIFFS1MB.bin?dl=0
EDIT: deleted compiled program that would have only worked with my SSID and password. Spelling