ESP8266 Community Forum

Posted: **Sat Oct 25, 2014 4:05 pm**

Firstly, I am using a Rapsberry pi as my linux environment. I followed the steps listed at https://github.com/esp8266/esp8266-wiki/wiki/Toolchain
until the following gave me error

Code: Select all

/opt/Espressif
git clone -b lx106 git://github.com/jcmvbkbc/crosstool-NG.git 
cd crosstool-NG
./bootstrap && ./configure --prefix=`pwd` && make && make install
./ct-ng xtensa-lx106-elf
./ct-ng build

Code: Select all

==> Executing: 'mkdir' '-p' '/opt/Espressif/crosstool-NG/.build/src/cloog-0.18.1/m4' 
[ERROR]    The 'mpc-1.0.2' sources were partially extracted.
[ERROR]    Please remove first:
[ERROR]     - the source dir for 'mpc-1.0.2', in '/opt/Espressif/crosstool-NG/.build/src'
[ERROR]     - the file '/opt/Espressif/crosstool-NG/.build/src/.mpc-1.0.2.extracting'
[ERROR]    I'll stop now to avoid any carnage...
[ERROR]  
[ERROR]  >>
[ERROR]  >>  Build failed in step 'Extracting and patching toolchain components'
[ERROR]  >>        called in step '(top-level)'
[ERROR]  >>
[ERROR]  >>  Error happened in: CT_Abort[scripts/functions@331]
[ERROR]  >>        called from: CT_Extract[scripts/functions@932]
[ERROR]  >>        called from: do_mpc_extract[scripts/build/companion_libs/140-mpc.sh@21]
[ERROR]  >>        called from: do_companion_libs_extract[scripts/build/companion_libs.sh@22]
[ERROR]  >>        called from: main[scripts/crosstool-NG.sh@606]
[ERROR]  >>
[ERROR]  >>  For more info on this error, look at the file: 'build.log'
[ERROR]  >>  There is a list of known issues, some with workarounds, in:
[ERROR]  >>      'share/doc/crosstool-ng/ct-ng.1.20.0/B - Known issues.txt'
[ERROR]

I have attached the log file.

Posted: **Wed Nov 26, 2014 1:53 am**

unset LD_LIBRARY_PATH

Posted: **Wed Nov 26, 2014 12:36 pm**

rupin.chheda wrote:
Code: Select all[ERROR] The 'mpc-1.0.2' sources were partially extracted. [ERROR] Please remove first: [ERROR] - the source dir for 'mpc-1.0.2', in '/opt/Espressif/crosstool-NG/.build/src' [ERROR] - the file '/opt/Espressif/crosstool-NG/.build/src/.mpc-1.0.2.extracting'

What happens if you follow the suggestion crosstool-NG gives?

vkotenev wrote:unset LD_LIBRARY_PATH

What makes you think it's related to LD_LIBRARY_PATH?

Posted: **Thu Nov 27, 2014 3:29 am**

I am a complete beginner with all the material this forum deals with, but I am slowly gaining a little bit of knowledge. I just received an ESP8266 module from Electrodragon (not yet unboxed). I was quite surprised to find from your post that all the development tools are available for the RaspberryPi, so I thought I would give it a try. Following the wiki Toolchain instructions, I was able to build (current Raspian version) without your errors. I did get the "Don't set the LD_LIBRARY_PATH. It screws up the build" error and unset it. There were no other errors. I assume that means your problem is with the dependencies or elsewhere, rather than in the toolchain.

ESP8266 Community Forum

Bunch of Errors when building crosstool as local user

Bunch of Errors when building crosstool as local user

Re: Bunch of Errors when building crosstool as local user

Re: Bunch of Errors when building crosstool as local user

Re: Bunch of Errors when building crosstool as local user