- Mon Feb 06, 2017 12:56 pm
#62174
I just ordered 2 ESP8266 units from ebay, and I was wanting to use one to allow my Amazon Echo to turn my computer on and off (I don't want Wake on LAN) I found a guide(Ish) For doing this with a raspberry pi (http://en.tacticalcode.de/2013/03/trans ... -gpio.html) But I am not well versed in this area of technology, especially not converting this to work with my nodeMCU. Is it possible to do something like this? Or is it something I would be better off getting a raspberry pi to do
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]