ESP8266 Community Forum

- Sat May 27, 2017 1:21 pm #66391 Tried your software today and I get the following output in an endless loop of resets.
Got the same results also without connecting to enc28j60

Code: Select allDISCOVER sent
 ets Jan  8 2013,rst cause:2, boot mode:(3,0)

load 0x40100000, len 27680, room 16
tail 0
chksum 0xb9
load 0x3ffe8000, len 2220, room 8
tail 4
chksum 0xf1
load 0x3ffe88b0, len 4796, room 4
tail 8
chksum 0xf2
csum 0xf2
sd§load ...
Initialise ENC stack, dhcp if requested
SPI - Using HSPIHttpd init, conn=0x3ffefebc
HttpdWired init, conn=0x3ffefea0

Ready
mode : sta(18:fe:34:da:32:48)
add if0
DISCOVER sent
 ets Jan  8 2013,rst cause:2, boot mode:(3,0)

- Wed Jun 21, 2017 8:00 am #67435 The github page gives 404?
https://github.com/Cicero-MF/esp_enc28j60

- Wed Jun 21, 2017 8:27 am #67436 It seems that the guy decided to close his github account for unknown reasons ...

- Wed Jun 21, 2017 9:51 am #67437 Looks like it just moved to a different Github account:
https://github.com/ESP32DE/esp_enc28j60
while there is another copy at:
https://github.com/klarsys/esp_enc28j60