ESP8266 Community Forum

- Fri Jul 30, 2021 4:08 pm #91978 Here is what the Serial Monitor sez...

FIRST BOOT

NAPT Range extender
Heap on start: 49512
Attempting to connect to '' using password '⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮'
....................
Can't connect to WiFi, connect to AP and configure...
AP: 192.168.4.1
Heap before: 47136
ip_napt_init(1000,10): ret=0 (OK=0)
ip_napt_enable_no(SOFTAP_IF): ret=0 (OK=0)
WiFi Network '⸮⸮@⸮
⸮u⸮⸮⸮'' with Password '' is now setup.
Heap after napt init: 22968
Clearing EEPROM Addresses
New STA SSID: myssid
New STA PASS: mypass
Writing new credentials
Wrote: m
Wrote: y
.
.
.
.
.


SECOND BOOT

NAPT Range extender
Heap on start: 49512
Attempting to connect to '' using password '⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮'
....................
Can't connect to WiFi, connect to AP and configure...
AP: 192.168.4.1
Heap before: 47136
ip_napt_init(1000,10): ret=0 (OK=0)
ip_napt_enable_no(SOFTAP_IF): ret=0 (OK=0)
WiFi Network '⸮⸮@⸮
⸮u⸮⸮⸮'' with Password '' is now setup.
Heap after napt init: 22968