- Mon Jun 06, 2016 6:59 am
#48665
Well i have tried this way and also i have modified my hardware circuit a little bit, now i am using a pull up resistor of 1k each at CH_PD and Reset respectively. on reset pin i have added a pushbutton to ground still it won't respond anything automatically after pressing that pushbutton connected to the reset it sends only garbages at many different baud rates except at 115200 it sends "invalid" with some garbages. I want to know that what does it represents and what may be the solution. Does it relate to the issue related to power supply or still it has some hardware connection issues??
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]