- Tue Jul 11, 2017 6:09 pm
#68169
The ESP8266 has two UARTs: the second UART is actually designed for debugging and is on GPIO13 (RX) and GPIO15 (TX).
RFZ wrote:UART would be okay, but I prefer to not use it, because I program via UART and my design will have a USB 2 UART chip on it.
The ESP8266 has two UARTs: the second UART is actually designed for debugging and is on GPIO13 (RX) and GPIO15 (TX).
Assumption is the mother of all f*ckups. At least: that's what I'm assuming.
- Wed Jul 12, 2017 9:05 am
#68192
UART1 is TX Only, there is no RX !
(except if you swap uarts, but then you still have only one with RX)
(except if you swap uarts, but then you still have only one with RX)
- Thu Jul 13, 2017 6:17 pm
#68228
That's good to know, I didn't realize that upto now.
Nevertheless, he only needs an output, so that shouldn't be a problem.
martinayotte wrote:there is no RX !
That's good to know, I didn't realize that upto now.
Nevertheless, he only needs an output, so that shouldn't be a problem.
Assumption is the mother of all f*ckups. At least: that's what I'm assuming.
