ESP8266 Community Forum

- Wed Aug 09, 2017 6:06 pm #68939 Hello Peeps,

Can someone pls tell me whats wrong with this code....

Button 2 doesnt work.

Code: Select all#include <ESP8266WiFi.h>

const char* ssid     = "***";
const char* password = "***";

const char* host = "192.168.1.90";


// set pin numbers:
const int buttonPin1 = 5;     // the number of the pushbutton pin 5
const int buttonPin2 = 4;     // the number of the pushbutton pin 4

// variables will change:
int buttonState1 = 1;         // variable for reading the pushbutton status
int buttonState2 = 1;         // variable for reading the pushbutton status


void setup() {
 
 WiFi.begin(ssid, password);
 
 // initialize the LED pin as an output:
 pinMode(buttonPin1, INPUT_PULLUP);     
 pinMode(buttonPin2, INPUT_PULLUP);


while (WiFi.status() != WL_CONNECTED) {
    delay(500);

}
  }

 
void loop(){
   
 buttonState1 = digitalRead(buttonPin1);
 
if (buttonState1 == 0) {   
   // turn button on:   // 

 delay(5000);


  WiFiClient client;
  const int httpPort1 = 80;
  if (!client.connect(host, httpPort1)) {
    Serial.println("connection failed");
    return;
  }
 
 
  String url1 = "http://192.168.1.90/salvardados.php?teste1";

 
  client.print(String("GET ") + url1 + " HTTP/1.1\r\n" +
               "Host: " + host + "\r\n" +
               "Connection: close\r\n\r\n");
  unsigned long timeout = millis();
             
buttonState2 = digitalRead(buttonPin2); 
}
 
 //////////////////////////////////////button 2////////////////////////////////////

else if (buttonState2 == 0) {   
   // turn button on:   // 

 delay(5000);

 
  WiFiClient client;
  const int httpPort2 = 80;
  if (!client.connect(host, httpPort2)) {
    Serial.println("connection failed");
    return;
  }
 
  String url2 = "http://192.168.1.90/salvardados.php?teste2";
 

  client.print(String("GET ") + url2 + " HTTP/1.1\r\n" +
               "Host: " + host + "\r\n" +
               "Connection: close\r\n\r\n");
  unsigned long timeout = millis();   
     
}


}