- Mon Jan 29, 2018 4:42 pm
#73564
Hello
I have an issue with my nodemcu V1.0 it freez about each 4 hour.
I use it as mysensors gateway and with help from the software serial library I use it aloso for read information from my powermeter (teleinformation (I'm in france)) with this lib
my sketch is
I use the Arduino ide 1.8.5 on Linux Armbian.
my setings :
I used the git version arduino ESP8266 drivers dowloded the 27/01/2018
the problem I have is that the nodemcu freezed after about 4 hours in most of case without any error in the debug consol.In some rare case I have a message dev 1153 (I don't know what that mean but is not comming from my code). I check the free memory with ESP.getFreeHeap() but it look stable (~200byte less) at about 40712Bytes free when crash. The power supply should not be an issu I Try to power it direct with the 3 ampers powersuply my orangepi 0 with the same effect.
What can I do to find the issue cause? have more debug info (without had a lot of serial print what I do but without any succes.)?
dou you have idea where the freeze comming from
thanks in advance for your help
I have an issue with my nodemcu V1.0 it freez about each 4 hour.
I use it as mysensors gateway and with help from the software serial library I use it aloso for read information from my powermeter (teleinformation (I'm in france)) with this lib
my sketch is
Code: Select all
/**
* The MySensors Arduino library handles the wireless radio link and protocol
* between your home built sensors/actuators and HA controller of choice.
* The sensors forms a self healing radio network with optional repeaters. Each
* repeater and gateway builds a routing tables in EEPROM which keeps track of the
* network topology allowing messages to be routed to nodes.
*
* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
* Copyright (C) 2013-2015 Sensnology AB
* Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
*
* Documentation: http://www.mysensors.org
* Support Forum: http://forum.mysensors.org
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*******************************
*
* REVISION HISTORY
* Version 1.0 - Henrik EKblad
* Contribution by a-lurker and Anticimex,
* Contribution by Norbert Truchsess <norbert.truchsess@t-online.de>
* Contribution by Ivo Pullens (ESP8266 support)
*
* DESCRIPTION
* The EthernetGateway sends data received from sensors to the WiFi link.
* The gateway also accepts input on ethernet interface, which is then sent out to the radio network.
*
* VERA CONFIGURATION:
* Enter "ip-number:port" in the ip-field of the Arduino GW device. This will temporarily override any serial configuration for the Vera plugin.
* E.g. If you want to use the defualt values in this sketch enter: 192.168.178.66:5003
*
* LED purposes:
* - To use the feature, uncomment any of the MY_DEFAULT_xx_LED_PINs in your sketch, only the LEDs that is defined is used.
* - RX (green) - blink fast on radio message recieved. In inclusion mode will blink fast only on presentation recieved
* - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
* - ERR (red) - fast blink on error during transmission error or recieve crc error
*
* See http://www.mysensors.org/build/esp8266_gateway for wiring instructions.
* nRF24L01+ ESP8266
* VCC VCC
* CE GPIO4
* CSN/CS GPIO15
* SCK GPIO14
* MISO GPIO12
* MOSI GPIO13
* GND GND
*
* Not all ESP8266 modules have all pins available on their external interface.
* This code has been tested on an ESP-12 module.
* The ESP8266 requires a certain pin configuration to download code, and another one to run code:
* - Connect REST (reset) via 10K pullup resistor to VCC, and via switch to GND ('reset switch')
* - Connect GPIO15 via 10K pulldown resistor to GND
* - Connect CH_PD via 10K resistor to VCC
* - Connect GPIO2 via 10K resistor to VCC
* - Connect GPIO0 via 10K resistor to VCC, and via switch to GND ('bootload switch')
*
* Inclusion mode button:
* - Connect GPIO5 via switch to GND ('inclusion switch')
*
* Hardware SHA204 signing is currently not supported!
*
* Make sure to fill in your ssid and WiFi password below for ssid & pass.
*/
// Enable debug prints to serial monitor
//#define MY_DEBUG
// Use a bit lower baudrate for serial prints on ESP8266 than default in MyConfig.h
//#define MY_BAUD_RATE 9600
// Enables and select radio type (if attached)
//#define MY_RADIO_NRF24
//#define MY_RF24_CHANNEL 83
//#define MY_RADIO_RFM69
#define MY_GATEWAY_ESP8266
#define MY_ESP8266_SSID "myssid"
#define MY_ESP8266_PASSWORD "mypassword"
// Enable UDP communication
//#define MY_USE_UDP
// Set the hostname for the WiFi Client. This is the hostname
// it will pass to the DHCP server if not static.
// #define MY_ESP8266_HOSTNAME "sensor-gateway"
// Enable MY_IP_ADDRESS here if you want a static ip address (no DHCP)
//#define MY_IP_ADDRESS 192.168.1.165
#define MY_MAC_ADDRESS 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x14
// If using static ip you need to define Gateway and Subnet address as well
//#define MY_IP_GATEWAY_ADDRESS 192,168,1,1
//#define MY_IP_SUBNET_ADDRESS 255,255,255,0
// The port to keep open on node server mode
#define MY_PORT 5003
// How many clients should be able to connect to this gateway (default 1)
#define MY_GATEWAY_MAX_CLIENTS 2
// Controller ip address. Enables client mode (default is "server" mode).
// Also enable this if MY_USE_UDP is used and you want sensor data sent somewhere.
//#define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 68
// Enable inclusion mode
//#define MY_INCLUSION_MODE_FEATURE
// Enable Inclusion mode button on gateway
// #define MY_INCLUSION_BUTTON_FEATURE
// Set inclusion mode duration (in seconds)
//#define MY_INCLUSION_MODE_DURATION 60
// Digital pin used for inclusion mode button
//#define MY_INCLUSION_MODE_BUTTON_PIN 3
// Set blinking period
// #define MY_DEFAULT_LED_BLINK_PERIOD 300
// Flash leds on rx/tx/err
// Led pins used if blinking feature is enabled above
#define MY_DEFAULT_ERR_LED_PIN 16 // Error led pin
#define MY_DEFAULT_RX_LED_PIN 16 // Receive led pin
#define MY_DEFAULT_TX_LED_PIN 16 // the PCB, on board LED
#if defined(MY_USE_UDP)
#include <WiFiUdp.h>
#endif
//Mysensors libs
#include <ESP8266WiFi.h>
#include <MySensors.h>
/******************************************************************************************************
*
*
* Teleinfo
*
*
******************************************************************************************************/
//#define DEBUG
#include <SoftwareSerial.h>
#include <LibTeleinfo.h>
#ifdef __AVR__ //for arduino
SoftwareSerial SerialTI (4,4); // Teleinfo Serial
#else // for ESP8266
SoftwareSerial SerialTI (D3,SW_SERIAL_UNUSED_PIN, false, 128); // Teleinfo Serial
#endif
TInfo tinfo; // Teleinfo object
int16_t test;
// paramètres des données téléinfo
// - ne pas toucher
// infos générales
///////////////////////////////////
#define CHILD_ID_ADCO 0
MyMessage msgVAR1 ( 0, V_VAR1 );
#define CHILD_ID_OPTARIF 1
#define CHILD_ID_ISOUSC 2
MyMessage msgCURRENT ( 0, V_CURRENT );
#define CHILD_ID_PTEC 3
#define CHILD_ID_IINST 4
#define CHILD_ID_ADPS 5
#define CHILD_ID_IMAX 6
#define CHILD_ID_PAPP 7
#define CHILD_ID_ADPS_PHASE 8
MyMessage msgWATT ( 0, V_WATT ); // pas vrai c'est des VA!
// infos tarif BASE
///////////////////////////////////
#define CHILD_ID_BASE 10
MyMessage msgKWH ( 0, V_KWH ); // en fait c'est des WH
// infos tarif HC/HP
///////////////////////////////////
#define CHILD_ID_HC_HC 20
#define CHILD_ID_HC_HP 21
// infos EJP
#define CHILD_ID_EJP_HN 30
#define CHILD_ID_EJP_HPM 31
#define CHILD_ID_PEJP 32
// infos tarif BBR (tempo)
///////////////////////////////////
#define CHILD_ID_BBR_HC_JB 40
#define CHILD_ID_BBR_HP_JB 41
#define CHILD_ID_BBR_HC_JW 42
#define CHILD_ID_BBR_HP_JW 43
#define CHILD_ID_BBR_HC_JR 44
#define CHILD_ID_BBR_HP_JR 45
#define CHILD_ID_DEMAIN 46
// sert à EJP/BBR
///////////////////////////////////
#define CHILD_ID_HHPHC 50
#define TARIF_BASE 1
#define TARIF_HCHP 2
#define TARIF_EJP 4
#define TARIF_TEMPO 8
// cas du triphasé
//////////////////////////////////
#define CHILD_ID_IINST1 60
#define CHILD_ID_IINST2 61
#define CHILD_ID_IINST3 62
#define CHILD_ID_IMAX1 63
#define CHILD_ID_IMAX2 64
#define CHILD_ID_IMAX3 65
#define CHILD_ID_PMAX 66
#define CHILD_ID_PPOT 67
boolean triphase = false;
boolean presentationfinished = false;
boolean FirstSend= false;
boolean PresentationRequested= false;
boolean NewFrameRecived = false;
uint8_t PhasetoSend=0;
uint8_t oldPhasetoSend=0;
uint8_t tarif = 0;
/* ======================================================================
Function: ADPSCallback
Purpose : called by library when we detected a ADPS on any phased
Input : phase number
0 for ADPS (monophase)
1 for ADIR1 triphase
2 for ADIR2 triphase
3 for ADIR3 triphase
Output : -
Comments: should have been initialised in the main sketch with a
tinfo.attachADPSCallback(ADPSCallback())
====================================================================== */
void ADPSCallback(uint8_t phase)
{
// n = numero de la phase 1 à 3
if (phase == 0)
phase = 1;
#ifdef DEBUG
Serial.print(F("ADPS : "));
Serial.println ( phase);
#endif
PhasetoSend = phase;
}
/* ======================================================================
Function: NewFrame
Purpose : callback when we received a complete teleinfo frame
Input : linked list pointer on the concerned data
Output : -
Comments: -
====================================================================== */
void NewFrame(ValueList * me)
{
char buff[32];
NewFrameRecived = true;
sprintf_P( buff, PSTR("New Frame (%ld Bytes free)"), ESP.getFreeHeap() );
Serial.println(buff);
}
/* ======================================================================
Function: SendSensor
Purpose : send mysensors message value
Input : label to check, actual label, value , poiter to mysensors message type ,Sensor id
Output : -
Comments: -
====================================================================== */
bool SendSensor( const __FlashStringHelper *label,char *searchLabel, char *value, MyMessage &msg, int SENSOR_ID ) {
uint32_t ValueToSend;
if ( strcmp_P(searchLabel,(const char*)label)!=0){
//Serial.println ("Fin SendSensor label different");
return false;
}
if ( (strcmp_P (searchLabel , (const char*) F("ADCO")) == 0)
|| (strcmp_P (searchLabel , (const char*) F("OPTARIF")) ==0 )
|| (strcmp_P (searchLabel , (const char*) F("PTEC")) ==0 )
|| (strcmp_P (searchLabel , (const char*) F("DEMAIN")) ==0 )
|| (strcmp_P (searchLabel , (const char*) F("HHPHC")) ==0 )
|| (strcmp_P (searchLabel , (const char*) F("PPOT")) ==0 )
){
send( msg.setSensor( SENSOR_ID ).set( value) );
}
else{
ValueToSend = atoi( value);
send( msg.setSensor( SENSOR_ID ).set( ValueToSend ) );
}
#ifdef DEBUG
Serial.print(searchLabel) ;
Serial.print(F(" : ")) ;
Serial.print(value) ;
Serial.println (F(" Value Sended")) ;
#endif
return true;
}
/* ======================================================================
Function: sendMysesors
Purpose : send mysensors value
Input : linked list pointer on the concerned data
Output : -
Comments: -
====================================================================== */
void sendMysesors()
{
boolean first_item = false;
// don't need to send value if presentation isn't done
if (!presentationfinished)
return;
ValueList * me = tinfo.getList();
// Got at least one ?
if (me) {
// Loop thru the node
while (me->next) {
// go to next node
// go to next node
if(! first_item)
me = me->next;
first_item = true;
// uniquement sur les nouvelles valeurs ou celles modifiées
// sauf si explicitement demandé toutes
if (!FirstSend || (me->flags & (TINFO_FLAGS_UPDATED | TINFO_FLAGS_ADDED) ))
{
// we have at least something ?
if (me->value && strlen(me->value))
{
// gestion mySensor,
SendSensor( F( "ADCO" ) , me->name, me->value, msgVAR1, CHILD_ID_ADCO );
SendSensor( F( "OPTARIF" ) , me->name, me->value, msgVAR1, CHILD_ID_OPTARIF );
SendSensor( F( "ISOUSC" ) , me->name, me->value, msgCURRENT, CHILD_ID_ISOUSC );
SendSensor( F( "PTEC" ) , me->name, me->value, msgVAR1, CHILD_ID_PTEC );
SendSensor( F( "ADPS" ) , me->name, me->value, msgCURRENT, CHILD_ID_ADPS );
SendSensor( F( "PAPP" ) , me->name, me->value, msgWATT, CHILD_ID_PAPP );
//begin add @yogui
if (triphase == true){
SendSensor( F( "IINST1" ) , me->name, me->value, msgCURRENT, CHILD_ID_IINST1 );
SendSensor( F( "IINST2" ) , me->name, me->value, msgCURRENT, CHILD_ID_IINST2 );
SendSensor( F( "IINST3" ) , me->name, me->value, msgCURRENT, CHILD_ID_IINST3 );
SendSensor( F( "IMAX1" ) , me->name, me->value, msgCURRENT, CHILD_ID_IMAX1 );
SendSensor( F( "IMAX2" ) , me->name, me->value, msgCURRENT, CHILD_ID_IMAX2 );
SendSensor( F( "IMAX3" ) , me->name, me->value, msgCURRENT, CHILD_ID_IMAX3 );
SendSensor( F( "PMAX" ) , me->name, me->value, msgWATT, CHILD_ID_PMAX );
SendSensor( F( "PPOT" ) , me->name, me->value, msgVAR1, CHILD_ID_PPOT );
}else{ // end add @yogui
SendSensor( F( "IINST" ) , me->name, me->value, msgCURRENT, CHILD_ID_IINST );
SendSensor( F( "IMAX" ) , me->name, me->value, msgCURRENT, CHILD_ID_IMAX );
}
if ( tarif == TARIF_BASE ) {
SendSensor( F( "BASE" ) , me->name, me->value, msgKWH, CHILD_ID_BASE );
} else if ( tarif == TARIF_HCHP ) {
SendSensor( F( "HC_HC" ) , me->name, me->value, msgKWH, CHILD_ID_HC_HC );
SendSensor( F( "HC_HP" ) , me->name, me->value, msgKWH, CHILD_ID_HC_HP );
} else if ( tarif == TARIF_EJP ) {
SendSensor( F( "EJP_HN" ) , me->name, me->value, msgKWH, CHILD_ID_EJP_HN );
SendSensor( F( "EJP_HPM" ) , me->name, me->value, msgKWH, CHILD_ID_EJP_HPM );
SendSensor( F( "PEJP" ) , me->name, me->value, msgKWH, CHILD_ID_PEJP );
} else if ( tarif == TARIF_TEMPO ) {
SendSensor( F( "BBR_HC_JB" ) , me->name, me->value, msgKWH, CHILD_ID_BBR_HC_JB );
SendSensor( F( "BBR_HP_JB" ) , me->name, me->value, msgKWH, CHILD_ID_BBR_HP_JB );
SendSensor( F( "BBR_HC_JW" ) , me->name, me->value, msgKWH, CHILD_ID_BBR_HC_JW );
SendSensor( F( "BBR_HP_JW" ) , me->name, me->value, msgKWH, CHILD_ID_BBR_HP_JW );
SendSensor( F( "BBR_HC_JR" ) , me->name, me->value, msgKWH, CHILD_ID_BBR_HC_JR );
SendSensor( F( "BBR_HP_JR" ) , me->name, me->value, msgKWH, CHILD_ID_BBR_HP_JR );
SendSensor( F( "DEMAIN" ) , me->name, me->value, msgVAR1, CHILD_ID_DEMAIN );
}
if ( (tarif & TARIF_EJP) || (tarif & TARIF_TEMPO) ) {
SendSensor( F( "HHPHC" ) , me->name, me->value, msgVAR1, CHILD_ID_HHPHC );
}
}
}
//send ADPS message
if (PhasetoSend){
send( msgVAR1.setSensor( CHILD_ID_ADPS ).set(1));
send( msgVAR1.setSensor( CHILD_ID_ADPS_PHASE ).set( PhasetoSend ) );
}else if (oldPhasetoSend != PhasetoSend) {
send( msgVAR1.setSensor( CHILD_ID_ADPS ).set(0));
send( msgVAR1.setSensor( CHILD_ID_ADPS_PHASE ).set( 0) );
}
oldPhasetoSend = PhasetoSend;
PhasetoSend =0;
}
FirstSend = true;
}
}
/* ======================================================================
Function: PresentationMysesors
Purpose : present the sensor depend the first readed frame
Input : linked list pointer on the concerned data
Output : -
Comments: -
====================================================================== */
void PresentationMysesors()
{
ValueList * me = tinfo.getList();
triphase = false;
// Got at least one ?
if (me) {
// Loop thru the node
while (me->next) {
// go to next node
me = me->next;
// we have at least something ?
if (me->value && strlen(me->value)){
if ((strcmp (me->name , "IINST1") == 0) || (strcmp (me->name , "IMAX1") ==0 )){
triphase = true;
}
// tarif option
if ( (strcmp (me->name , "OPTARIF") == 0) && (strcmp( me->value, "BASE" ) == 0 )) {
tarif = TARIF_BASE;
} else if (( strcmp (me->name , "OPTARIF") == 0) && (strcmp( me->value, "HC.." ) == 0 )) {
tarif = TARIF_HCHP;
}else if ((strcmp (me->name , "OPTARIF") == 0) && (strcmp( me->value, "EJP." ) == 0 )) {
tarif = TARIF_EJP;
} else if ((strcmp (me->name , "OPTARIF") == 0) && (strstr( me->value, "BBR" ) != NULL )) { // ! c'est BBRx (x varie) d'ou un strstr et non strcmp
tarif = TARIF_TEMPO;
}
}
}
}
if (triphase == true){
present( CHILD_ID_IINST1, S_POWER );
present( CHILD_ID_IINST2, S_POWER );
present( CHILD_ID_IINST3, S_POWER );
present( CHILD_ID_IMAX1, S_POWER );
present( CHILD_ID_IMAX2, S_POWER );
present( CHILD_ID_IMAX3, S_POWER );
present( CHILD_ID_PMAX, S_POWER );
present( CHILD_ID_PPOT, S_POWER );
}
else{
present( CHILD_ID_IINST, S_POWER );
present( CHILD_ID_IMAX, S_POWER );
}
if ( tarif == TARIF_BASE) {
present( CHILD_ID_BASE, S_POWER );
} else if ( tarif = TARIF_HCHP ) {
present( CHILD_ID_HC_HC, S_POWER );
present( CHILD_ID_HC_HP, S_POWER );
} else if ( tarif = TARIF_EJP) {
present( CHILD_ID_EJP_HN, S_POWER );
present( CHILD_ID_EJP_HPM, S_POWER );
present( CHILD_ID_PEJP, S_POWER );
} else if ( tarif = TARIF_TEMPO) {
present( CHILD_ID_BBR_HC_JB, S_POWER );
present( CHILD_ID_BBR_HP_JB, S_POWER );
present( CHILD_ID_BBR_HC_JW, S_POWER );
present( CHILD_ID_BBR_HP_JW, S_POWER );
present( CHILD_ID_BBR_HC_JR, S_POWER );
present( CHILD_ID_BBR_HP_JR, S_POWER );
present( CHILD_ID_DEMAIN, S_POWER );
}
// cas particulier, appartient a EJP et TEMPO
if ( (tarif & TARIF_EJP) || (tarif & TARIF_TEMPO) ) {
present( CHILD_ID_HHPHC, S_POWER );
}
PresentationRequested= false;
presentationfinished = true;
}
/* ======================================================================
Function: presentation
Purpose : Mysesors : presentation sensor to the controler
Input : -
Output : -
Comments: -
====================================================================== */
void presentation() {
sendSketchInfo( "Teleinfo Sensor", "1.0" );
present( CHILD_ID_ADCO, S_POWER );
present( CHILD_ID_OPTARIF, S_POWER );
present( CHILD_ID_ISOUSC, S_POWER );
present( CHILD_ID_PTEC, S_POWER );
present( CHILD_ID_ADPS, S_POWER );
present( CHILD_ID_PAPP, S_POWER );
present( CHILD_ID_ADPS_PHASE, S_POWER );
presentationfinished = false;
PresentationRequested = true;
FirstSend = false;
//first read
// Teleinformation processing
if ( SerialTI.available() ) {
tinfo.process(SerialTI.read());
}
}
/* ======================================================================
Function: setup
Purpose : Setup I/O and other one time startup stuff
Input : -
Output : -
Comments: -
====================================================================== */
void setup()
{
// Set CPU speed to 160MHz
system_update_cpu_freq(160);
// Serial, pour le debug
Serial.begin(115200);
#ifdef DEBUG
Serial.println(F("========================================"));
Serial.println(F(__FILE__));
Serial.println(F(__DATE__ " " __TIME__));
Serial.println();
#endif
SerialTI.begin(1200);
// Init teleinfo
tinfo.init();
// Attacher les callback dont nous avons besoin
// pour cette demo, ici attach data
// Attacher les callback dont nous avons besoin
tinfo.attachADPS(ADPSCallback);
tinfo.attachNewFrame(NewFrame);
Serial.println(F("Teleinfo started"));
}
/* ======================================================================
Function: loop
Purpose : infinite loop main code
Input : -
Output : -
Comments: -
====================================================================== */
void loop()
{
char c;
if (NewFrameRecived){
if (presentationfinished){
sendMysesors();
NewFrameRecived = false;
}
else if (PresentationRequested){
PresentationMysesors();
NewFrameRecived = false;
}
}
// Teleinformation processing
if ( SerialTI.available() ) {
//tinfo.process(SerialTI.read());
// Read Serial and process to tinfo
c = SerialTI.read();
//Serial1.print(c);
tinfo.process(c);
}
}
I use the Arduino ide 1.8.5 on Linux Armbian.
my setings :
I used the git version arduino ESP8266 drivers dowloded the 27/01/2018
the problem I have is that the nodemcu freezed after about 4 hours in most of case without any error in the debug consol.In some rare case I have a message dev 1153 (I don't know what that mean but is not comming from my code). I check the free memory with ESP.getFreeHeap() but it look stable (~200byte less) at about 40712Bytes free when crash. The power supply should not be an issu I Try to power it direct with the 3 ampers powersuply my orangepi 0 with the same effect.
What can I do to find the issue cause? have more debug info (without had a lot of serial print what I do but without any succes.)?
dou you have idea where the freeze comming from
thanks in advance for your help
You do not have the required permissions to view the files attached to this post.
