ESP8266 Community Forum

- Mon Mar 21, 2016 8:06 pm #43753

The baud rate has nothing to do with this. Getting the right esp_init_data_default.bin does. Read Flashing the firmware for more info.

That doesn't improved it
Now I get with 12500 baud

Code: Select allFatal exception 9(LoadStoreAlignmentCause):
epc1=0x4022153f, epc2=0x00000000, epc3=0x00000000, excvaddr=0x4022153f, depc=0x00000000

 ets Jan  8 2013,rst cause:2, boot mode:(3,6)

load 0x40100000, len 26636, room 16
tail 12
chksum 0xa7
ho 0 tail 12 room 4
load 0x3ffe8000, len 2260, room 12
tail 8
chksum 0xe1
load 0x3ffe88d4, len 8, room 0
tail 8
chksum 0x3c
csum 0x3c
don't use rtc mem data


or

Code: Select allFatal exception 28(LoadProhibitedCause):
epc1=0x402244ff, epc2=0x00000000, epc3=0x00000000, excvaddr=0x0000002c, depc=0x00000000

 ets Jan  8 2013,rst cause:2, boot mode:(3,6)

load 0x40100000, len 26636, room 16
tail 12
chksum 0xa7
ho 0 tail 12 room 4
load 0x3ffe8000, len 2260, room 12
tail 8
chksum 0xe1
load 0x3ffe88d4, len 8, room 0
tail 8
chksum 0x3c
csum 0x3c
don't use rtc mem data
Fatal exception 28(LoadProhibitedCause):
epc1=0x402244ff, epc2=0x00000000, epc3=0x00000000, excvaddr=0x0000402c, depc=0x00000000

 ets Jan  8 2013,rst cause:2, boot mode:(3,6)

ets_main.c


or the third of my first post with repeated reboot