is there any working example?
thanks
Explore... Chat... Share...
Moderator: igrr
#include <ESP8266mDNS.h>
void setup() {
// Start the Wi-Fi connection
WiFi.begin("your_SSID", "your_password");
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
}
// Start the mDNS responder
if (MDNS.begin("esp8266")) {
Serial.println("mDNS responder started");
} else {
Serial.println("Error setting up mDNS responder!");
}
}
void loop() {
// Your code here
}
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]