shouldn't a clean copy of the "esp_init_data_default.bin" flashed (or at least cleared, gets regenerated on first boot) with every upload of sketch?
Maybe this and a "clean" of the rf_calib sector should be a default in the flash tool?
Explore... Chat... Share...
Moderator: igrr
Nander wrote:(By googling) I figured out the problem and a work-around. The problem seems to be that the RF module is not properly initialised when the device is powered on or awakes from reset.
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]