flashing totally different FW Clears what ever the issue is..
ie try AT FW, ESP-Basic FW, NodeMCU 0.9.6
Explore... Chat... Share...
John Miller wrote:Thanks for the help to both of you.
If GPIO 02 is set to HIGH the blue LED won't flash once although data is transmitted heavily over TX (occurs in operation mode with GPIO 0 HIGH and 15 LOW). If GPIO 2 is disconnected during operation, the LED starts to flash again. This isn't normal, right? Maybe a breakdown between GPIO02 and TX?
Thanks for the utility. It will come in handy in the future. I think this ESP is broken.
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]