- Fri Jan 30, 2015 1:01 pm
#8527
This small code work fine , but if not wait until command Serial.println("AT+CIPCLOSE=0"); is execute (when click button 2 consecutive times on web page module no responding,is blocking).
When attemp for Serial.println("AT+CIPCLOSE=0"); is executed (i know but led blue blinking what is executed
) i'ts work normally.
Thanks in advanced ! Already i read some topics here and have not seen something similar to my problem.
And if we have not seen, I apologize !
Thanks!
When attemp for Serial.println("AT+CIPCLOSE=0"); is executed (i know but led blue blinking what is executed
) i'ts work normally. Code: Select all
byte b;
void setup()
{
pinMode(13, OUTPUT);
Serial.begin(9600);
//------------------------- INITIALISE ESP8266 MODULE ----------------------
Serial.println("AT+RST");
delay(2000);
Serial.println("AT+CIPMUX=1");
delay(2000);
Serial.println("AT+CIPSERVER=1,80");
delay(2000);
// ------------------END INITIALISE ---------------------------------------------
}
void loop()
{
// -------- IF STRING RECEIVE CONTAIN "+IPD"--------------
getch();
if (b==43){// +
getch();
if (b==73){// I
getch();
if (b==80){ //P
getch();
if (b==68){// D
getch();
getch();
getch();
getch();
getch();
getch();
getch();
getch();
getch();
getch();
getch();
getch();
getch();
// -------IF AFTER "GET/" IS "A" ("GET/A")-----
if (b==65){ //caracter A
digitalWrite(13, HIGH);//LED ON OF ARDUINO
}
// -------IF AFTER "GET/" IS "B" ("GET/B")-----
else if (b==66){ //caracter B
digitalWrite(13, LOW);//LED OFF ON ARDUINO
}
//-----------------ALWAIS SEND THIS HTML PAGE---------------------
Serial.println("AT+CIPSEND=0,168");
delay(2000);
Serial.println("<html><h1>Pagina uficiale famiglia BOBOACA</h1><br><a href='A'><button type='button'>LED ON!</button></a><a href='B'><button type='button'>LED OFF!</button></a></html>");// 167+1
delay(2000);
//-----------AND CLOSE CONNECTION------------------------------
Serial.println("AT+CIPCLOSE=0");
}
}
}
}
}
void getch(){
if(Serial.available()){
delay(50);
b = Serial.read();
}
}
Thanks in advanced ! Already i read some topics here and have not seen something similar to my problem.
And if we have not seen, I apologize !
Thanks!
