
FTDI enumerates properly and the ESP8266 outputs a 26MHz square wave on GPIO0 (as written in the datasheet when no code is loaded).
At least a partitially YAY

Will test the rest of the board tomorrow or on the weekend..
Explore... Chat... Share...
AT+CWLAP
+CWLAP:(0,"",0)
+CWLAP:(4,"Locatec-WLAN",-88)
+CWLAP:(3,"Locatec-WLAN",-70)
+CWLAP:(3,"wifi_proveo",-45)
+CWLAP:(4,"GaesteWLAN",-77)
+CWLAP:(4,"AIRNET",-77)
AT+CWLAP
+CWLAP:(0,"",0)
+CWLAP:(4,"Locatec-WLAN",-91)
+CWLAP:(3,"Locatec-WLAN",-76)
+CWLAP:(3,"wifi_proveo",-58)
+CWLAP:(4,"AIRNET",-76)
+CWLAP:(4,"GaesteWLAN",-76)
AT+CWLAP
+CWLAP:(0,"",0)
+CWLAP:(3,"Locatec-WLAN",-85)
+CWLAP:(3,"wifi_proveo",-65)
It takes about 20-25 seconds for home assistant c[…]
I tried to upgrade tof my sonoff basic R2 with the[…]
a problem Perhaps you want to define "Probl[…]
Rebooting your router will not give you a faster I[…]
There are no other notifications from esptool.py i[…]
Using the Arduino IDE, you'll learn how to set up […]
In this project, you will post to Twitter using an[…]
In this project, we will build a water level contr[…]
I guess I'm late, but I had the same problem and f[…]
Last night I received my first D1 Minis for a lear[…]
Although I am aware that this is an old post, I fe[…]