ESP8266 Community Forum

- Fri Mar 20, 2015 2:13 am #12304 I'm expecting a more open licensing term, as promised by John Lee.

My ESP8266 dev board https://www.tindie.com/products/Ba0sh1/ ... d-adapter/

- Fri Mar 20, 2015 9:14 am #12323

I'm expecting a more open licensing term, as promised by John Lee.

It is already up on espressif's bbs. http://bbs.espressif.com/viewtopic.php?f=7&t=288
They are also running ... Espressif Bug Bounty Program ... $200 for any developer reporting a previously unknown bug in our latest Version 1.0 ...

- Fri Mar 20, 2015 7:34 pm #12360 Still first order broken...
cd ~/ESP-8266/esp_iot_sdk_v1.0.0/examples/IoT_Demo
make
make: Nothing to be done for `FORCE'.
./gen_misc.sh
Please follow below steps(1-5) to generate specific bin(s):
STEP 1: choose boot version(0=boot_v1.1, 1=boot_v1.2+, 2=none)
enter(0/1/2, default 2):

boot mode: none

STEP 2: choose bin generate(0=eagle.flash.bin+eagle.irom0text.bin, 1=user1.bin, 2=user2.bin)
enter (0/1/2, default 0):

generate bin: eagle.flash.bin+eagle.irom0text.bin

STEP 3: choose spi speed(0=20MHz, 1=26.7MHz, 2=40MHz, 3=80MHz)
enter (0/1/2/3, default 2):

spi speed: 40 MHz

STEP 4: choose spi mode(0=QIO, 1=QOUT, 2=DIO, 3=DOUT)
enter (0/1/2/3, default 0):

spi mode: QIO

STEP 5: choose spi size(0=256KB, 1=512KB, 2=1024KB, 3=2048KB, 4=4096KB)
enter (0/1/2/3/4, default 1):

spi size: 512 KB


start...

make: Nothing to be done for `FORCE'.

- Sat Jun 06, 2015 10:55 pm #19712

Still first order broken...
cd ~/ESP-8266/esp_iot_sdk_v1.0.0/examples/IoT_Demo
make
make: Nothing to be done for `FORCE'.
./gen_misc.sh
Please follow below steps(1-5) to generate specific bin(s):
STEP 1: choose boot version(0=boot_v1.1, 1=boot_v1.2+, 2=none)
enter(0/1/2, default 2):

boot mode: none

STEP 2: choose bin generate(0=eagle.flash.bin+eagle.irom0text.bin, 1=user1.bin, 2=user2.bin)
enter (0/1/2, default 0):

generate bin: eagle.flash.bin+eagle.irom0text.bin

STEP 3: choose spi speed(0=20MHz, 1=26.7MHz, 2=40MHz, 3=80MHz)
enter (0/1/2/3, default 2):

spi speed: 40 MHz

STEP 4: choose spi mode(0=QIO, 1=QOUT, 2=DIO, 3=DOUT)
enter (0/1/2/3, default 0):

spi mode: QIO

STEP 5: choose spi size(0=256KB, 1=512KB, 2=1024KB, 3=2048KB, 4=4096KB)
enter (0/1/2/3/4, default 1):

spi size: 512 KB


start...

make: Nothing to be done for `FORCE'.

Did you ever manage to get around this problems? I have been stuck for last 2 days with same problem. Earlier the problem was Crosstool-NG directory not found error, then I started getting Nothing to be done for 'FORCE' error.