- Mon Apr 20, 2015 4:16 pm
#15157
SolveD with a firmware update.
But now i get busy p... After close tcp and i cant send more commands.
But now i get busy p... After close tcp and i cant send more commands.
- Tue Apr 21, 2015 1:16 am
#15167
Can you post your firmware and source code please?
- Sun May 17, 2015 12:41 pm
#17675
The "busy pl.." will happen eventually in most cases when you try and connect, because if something isn't right when it closes the ESP will hang FOREVER. To solve this you can either wire the ESP to an N-Mosfet to power it on and off using the arduino, this works well as a hardware reset... OR "Transparent mode" if you want to go software this is supposed to work but I haven't tried it and can't verify..
- Tue May 19, 2015 2:54 pm
#17892
I also facing Busy p after a connection is closed, I dont want Hardware reset, Here is my Log:
Host: 192.168.4.1
Connection: keep-aliveAT+CIPSEND=0,52
OK
> <h1>Hello</h1><h2>World!</h2><button>LED1</button>
SEND OK
AT+CIPSEND=0,21
OK
> <button>LED2</button>
SEND OK
AT+CIPCLOSE=0
1,CONNECT
+IPD,1,314:GET /favicon.ico HTTP/1.1
Host: 192.168.4.1
Connection: keep-alive
Accept: */*
User-Agent: Mozilla/5.0 (Linux; Android 4.4.2; iris X1 Build/X1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/39.0.2171.93 Mobile Safari/537.36
Accept-Encoding: gzip, deflate, sdch
Accept-Language: en-GB,en-US;q=0.8,en;q=0.6
0,CLOSED
OK
,400:GET / HTTP/1.1
Host: 192.168.4.1
Connection: keep-aliveAT+CIPSEND=0,52
busy p...
<h1>Hello</h1><h2>World!</h2><button>LED1</button>AT+CIPSEND=0,21
busy p...
<button>LED2</button>AT+CIPCLOSE=0
busy p...
---------------------------
My Question is what is transprent mode, how to use it, and how this can solve busy p problem.
THanks a lot.
nate4495 wrote:The "busy pl.." will happen eventually in most cases when you try and connect, because if something isn't right when it closes the ESP will hang FOREVER. To solve this you can either wire the ESP to an N-Mosfet to power it on and off using the arduino, this works well as a hardware reset... OR "Transparent mode" if you want to go software this is supposed to work but I haven't tried it and can't verify..
I also facing Busy p after a connection is closed, I dont want Hardware reset, Here is my Log:
Host: 192.168.4.1
Connection: keep-aliveAT+CIPSEND=0,52
OK
> <h1>Hello</h1><h2>World!</h2><button>LED1</button>
SEND OK
AT+CIPSEND=0,21
OK
> <button>LED2</button>
SEND OK
AT+CIPCLOSE=0
1,CONNECT
+IPD,1,314:GET /favicon.ico HTTP/1.1
Host: 192.168.4.1
Connection: keep-alive
Accept: */*
User-Agent: Mozilla/5.0 (Linux; Android 4.4.2; iris X1 Build/X1) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/39.0.2171.93 Mobile Safari/537.36
Accept-Encoding: gzip, deflate, sdch
Accept-Language: en-GB,en-US;q=0.8,en;q=0.6
0,CLOSED
OK
,400:GET / HTTP/1.1
Host: 192.168.4.1
Connection: keep-aliveAT+CIPSEND=0,52
busy p...
<h1>Hello</h1><h2>World!</h2><button>LED1</button>AT+CIPSEND=0,21
busy p...
<button>LED2</button>AT+CIPCLOSE=0
busy p...
---------------------------
My Question is what is transprent mode, how to use it, and how this can solve busy p problem.
THanks a lot.
