ESP8266 Community Forum

- Mon Jul 13, 2015 11:56 am #23151 EUREKA !!!
SOLVED (Probably )
But I have to make sure

Now I have following Results:

First Set with ESP8266 Module:
ESP8266 6491 T=21.30 Time:652s

Second Set with ESP8266 Module:

Code: Select allStart and Work Times[ms]= 207 609335
Start and Work Times[ms]= 207 609435
Start and Work Times[ms]= 207 609535
Start and Work Times[ms]= 207 609635
Start and Work Times[ms]= 207 609735

and still inceasing

- Mon Jul 13, 2015 12:38 pm #23154 Hi
HAve you tried erasing the flash (blank.bin at right address. Not the same address as ESP-12 (withoutE) I think)
Without any association to your Wifi-network there is no reason at all for it to care which routers are active and which are not.
Kind regards
Jimmy

- Mon Jul 13, 2015 1:01 pm #23157 Problem solved

There was conflict in the IP addresses in my routers.
Both had 192.168.0.1. So far, it somehow didn't bother. I changed the IP of the second one to 192.168.2.1
And is fine.
Thank you all for your interest and help.
I hope that in the future it will help us to look for solutions, not only in our device.
Solving the problem took me over 3 weeks. I couldn't think of anything else.

Now I have:
on page 192.168.2.100 following result ESP8266 46025 T=21.30 Time:4615s

Once again, thank you very much

Last edited by WStan on Thu Jul 16, 2015 3:18 am, edited 1 time in total.

- Thu Jul 16, 2015 3:09 am #23391 Working ESP8266-01
After overcoming the problems described above working ESP8266- unit can be seen here:
http://silesia-eco.ue.wroc.pl/Home/EcoHCentralH