ESP8266 Community Forum

- Sun Nov 22, 2015 4:37 pm #34714

I downloaded it, checked its MD5 chksum which matched perfectly. Ran the updater to update the path and edited the required file to set to COM23 in my case. Had tested the NodeMCU board before using lualoader and everything worked perfectly.

Tried to test examples "hello_world", "blinky", "sysinfo", "wifi-sniffer"--all compile and build ok, flash ok but print garbage on the terminal. When I look at HEX it is nearly all examples emit the same output at reset.
Can you help resolve this problem, cannot proceed any further to take advantage of the wonderful build you have put together.
fshah

I have exactly the same problem... I even attached a second FTDI to my NodeMCU (on GPIO2)... serial-comms produce garbage...
tried with the serial Terminal in Eclips... tried with Termite... even with the ArduinoSerialTerminal... all garbage
tried all Baudrates.. even other settings than N81..
When I flash the same NodeMCU-Chip from Arduino IDE everything works fine... from Eclips.. it flashes till 100% everything OK... but everything comming from the Chip after that is garbled..
What to do??
THNX in advance

- Mon Nov 30, 2015 7:23 am #35344 thanks for the work you have put into this project, I have managed to follow your instructions and install everything, but now, I am trying to compile the hello-world example but am getting an error, something to do with"udhcp" missing from the RTOS SDK bunch, thanks in advance.

You do not have the required permissions to view the files attached to this post.

- Mon Nov 30, 2015 7:09 pm #35393 Hi,

I'm having a issue with the compilation time.

I've been using this sdk for 6 months now and it was compiling my project and others in no more than 6 seconds.
I reinstall the sdk last week and now the compilation time is more than a minute and half.

I tried with other two notebooks and got the same.

Any one know how to solve this?

- Wed Dec 02, 2015 2:41 pm #35530 A new version of my build Espressif DevKit for Windows v2.0.9
The list of changes to the first page:
viewtopic.php?f=9&t=820&p=4639#p4639

Update procedure:
1. Remove the version 2.0.x
2. Install the new version 2.0.9
ATTENTION!!! When you delete the old version will be removed entire directory C:\Espressif

Unofficial Development Kit for Espressif ESP8266