New request! MOAR GPIOS! For ON/OFF 9 and 10???

Tell me what you want, What you really, really want.

Moderator: Mmiscool

 Reply

User avatar

<SOLVED> MOAR GPIOS! For ON/OFF 9 and 10???

By forlotto
- Mon Jan 04, 2016 10:56 pm #37931 GPIO 9 and 10 ....

THEY DO WORK WITH BASIC! ESP12E tested so far anyways!

would be nice if they were mapped though

SD2 = GPIO9 or pin 9
SD3 = GPIO10 or pin 10

flashed with flash download tools

DIO mode
32MB flash
Hardware Basic WIFI Dev Board and NodeMCU!

Enjoy!
Last edited by forlotto on Tue Jan 05, 2016 12:19 am, edited 1 time in total.
User avatar

Re: New request! MOAR GPIOS! For ON/OFF 9 and 10???

By martinayotte
- Mon Jan 04, 2016 11:39 pm #37935 As I said in the other thread, this success is probably hardware dependent, if someone is using plain ESP12, it probably don't work since the Flash is hookup as QIO but not DIO, therefore, some wires cut and soldering are required but not easily done on ESP12.
User avatar

Re: New request! MOAR GPIOS! For ON/OFF 9 and 10???

By forlotto
- Tue Jan 05, 2016 12:18 am #37938 eps12E yes correct...

But it would be nice for someone to verify this on an esp12 if they got it! I believe all of my boards are 12E.

If I were a betting man though it may just be something that is 12 specific as the link you shared was actually an ESP07 if I recall correct.

Either way very useful but I agree needs a real testing to be certain that it works all the more reason to make the pins specific to nodemcu as all versions I have seen minus maybe 1 all seem to use the 12E with 4MB flash... could be wrong we shall see here and the E may not even matter in this case for all we know.

But surely worth a test!
 Reply
Return to Feature Requests