ESP8266 Community Forum

- Wed Jan 13, 2016 6:05 pm #38718 THE MODULE IS HARD TO TAKE COMMANDS, I KEEP GETTING THIS LINE OF STUFF...


ets Jan 8 2013,rst cause:4, boot mode:(3,7)

wdt reset
load 0x40100000, len 1320, room 16
tail 8
chksum 0xb8
load 0x3ffe8000, len 776, room 0
tail 8
chksum 0xd9
load 0x3ffe8308, len 412, room 0
tail 12
chksum 0xb9
csum 0xb9

2nd boot version : 1.3(b3)
SPI Speed : 40MHz
SPI Mode : QIO
SPI Flash Size : 4Mbit
jump to run user1

rŽÿ
ready

any ideas ????

- Wed Jan 13, 2016 9:52 pm #38726 had a friend over tonight, i found out how to find clients on my router
but my wifi clock is not to be seen, we tried several things.. even entering my IP of the wifi module, for some reason it just does not want to see it..

- Fri Jan 15, 2016 7:19 pm #38911 OK UPDATE
i am trying a different wifi module ( just in case it has a glitch , sometimes it hangs RX TX lights stay on full and it starts to overheat )
ok, i have a new module today... redid all that i learned ( lil easier this time )
issue now is my router does not see any connection.. i am wondering id it only tried to connect at certain time or what..
trying to get this answer out of the maker.
anyway i tried a earlier suggestion to get current IP info ? )
i typped this command and got result at bottom..
AT+CIPSTA?
+CIPSTA:"0.0.0.0"
mean anything ? should i see a valid IP number stored in the wifi module ?
or will this number only be seen when it is in the clock ?
if it needs to be in the wifi module is there a easy way to program it?
or does anyone have ideas why the router does not see the connection...

- Fri Jan 15, 2016 8:56 pm #38918 maybe this might help some ??
that attachments shows current wifi setting in router.
my internet works just fine, but maybe you see something obvious as to why the router does not see my clock
its IP is 192.168.4.1

Attachments

wifi settings.doc

(210.5 KiB) Downloaded 182 times