ESP8266 Community Forum

- Fri Feb 26, 2016 1:18 pm #41953 Hello Forum,

I would like to send with MMISCOOL's Basic Interpreter to my HomeMatic home control following.
192.168.1.31:8181/config/xmlapi/statechange.cgi?ise_id=3945&new_value=1

If i enter this with firefox browser, the corresponding channel is switched,
but what must be done in the interpreter?

Would be nice if me someone could give a hint or a solution.

Gerd

- Fri Feb 26, 2016 4:53 pm #41959 If you were using the normal port 80 you could use the wget() function to do this.

Code: Select allbla = wget("192.168.1.31/config/xmlapi/statechange.cgi?ise_id=3945&new_value=1#sthash.FMZPhHL1.dpuf")

Serial terminal in the chrome browser see https://serialTerminal.com

http://esp8266basic.com
A BASIC interpreter for your ESP

Working now on Autodrop3d. A 3d printer with automatic part ejection system. https://autodrop3d.com

- Fri Feb 26, 2016 9:01 pm #41967 Interesting so ports other than 80 are not allowed. Future upgrade by next year maybe never know not that it makes a whole heck of a lot of difference I would imagine HomeMatic may be able to have a different port set somehow but I see a reason for wanting to use a nonstandard port.

+1 to the OP on this one I never really explored beyond port 80 on basic. Great question.

Helpful? Donate To help support Mike http://www.esp8266basic.com click the donate button lets keep this project going and hope we can get the ESP32 in the mix. BEGINNERS GUIDE HERE http://www.esp8266.com/viewtopic.php?f=40&t=6732

Where I buy my ESP8266 boards from... (Banggood)

- Sat Feb 27, 2016 7:55 am #41991 Thanks Forum for reading,
thank Mmiscool for the explanation.

But I do not understand # sthash.FMZPhHL1.dpuf
Why? for what?

The solution is easier than I thought, after I take
old and working-> 192.168.1.31:8181/config/xmlapi/statechange.cgi?ise_id=3945&new_value=1
in Firefox
new and working too -> 192.168.1.31/config/xmlapi/statechange.cgi?ise_id=3945&new_value=1
have tested (without the port specification :8181)
and like to appear connected, I now know for HomeMatic CCU2
is the port specified here is not necessary.

Next step was
wget ("192.168.1.31/config/xmlapi/statechange.cgi?ise_id=3945&new_value=1")
and it works flawlessly with fast switching times with my ESP-01.

I'll turn it into a small program with query on / off
and put it in "project".


Gerd