- Mon May 23, 2016 2:36 pm
#47897
How can i send Number to web server with this code? if i want to put it on some where
Code: Select all
#include<TEE_ESP_WIFI.h>
#include <SoftwareSerial.h>
#define pinEN 9
#define ESP_Rx 10
#define ESP_Tx 11
String ssid="stk";
String pass="stk123456";
//String serverip="192.168.1.37";
String port="80";
#define LED 7
ESP wifi(ESP_Rx,ESP_Tx,pinEN);
void print_debug(String data)
{
Serial.print(data);
}
void setup()
{
pinMode(LED, OUTPUT);
digitalWrite(LED,LOW);
Serial.begin(9600);
wifi.begin(9600);
Serial.println("EPS8226");
wifi.Event_debug = print_debug;
wifi.reset();
wifi.setmode(STATION);
wifi.disconnectAP();
wifi.connectAP(ssid,pass);
wifi.multipleconnect(MULTIPLE);
wifi.startserver(port);
String ip = wifi.myip();
for(unsigned char i=0;i<5;i++)
{
wifi.stop(i); //close all socket
}
}
void loop()
{
String data = wifi.readstringdata();
if(data.length())
{
Serial.println(data);
if(data=="GET /?status=1 HTTP/1.1")
{
digitalWrite(LED,HIGH);
}
if(data=="GET /?status=0 HTTP/1.1")
{
digitalWrite(LED,LOW);
}
html_web();
wifi.stop(wifi.currentID);
}
}
void html_web()
{
delay(3000);
char *data1= "<html><header><title>ESP8266 Webserver</title></header>\"LED Control\"<FORM action=\"\"><P> <INPUT type=\"radio\" name=\"status\" value=\"1\">ON";
char *data2= "<P> <INPUT type=\"radio\" name=\"status\" value=\"0\">OFF<P> <INPUT type=\"submit\" value=\"Submit\"></FORM><body></body></html>";
wifi.write_HTML(wifi.currentID,data1);
wifi.write_HTML(wifi.currentID,data2);
}
