- Thu Feb 11, 2016 8:06 am
#40907
I found the solution : i had to create FS using https://github.com/esp8266/arduino-esp8266fs-plugin
Regards
Regards
- Sat Oct 08, 2016 7:47 am
#56236
I'd use a o.o1 uF cap and tie the reset line to ground. On power-up, it will keep the RST line low as the cap charges up to Vcc
Lotus wrote:I wonder why the RESET pin is showed tied high without a pull up.
1K pullups and pulldowns are a power hog too!
I'd use a o.o1 uF cap and tie the reset line to ground. On power-up, it will keep the RST line low as the cap charges up to Vcc
