- Sat Mar 18, 2017 3:28 pm
#63902
From the level It's not a newbie question. But I'm a newbie in embedded programming (i'm coming from the web development side).
I have an ai Thinker NodeMCU dev board connected with an Ir diode.
i collected with my raspberry and irrecord the specific key codes. My tests to controll my tv with these code over irsend is functioning (e.g. irsend SEND_ONCE philips KEY_MUTE)
*KEY_MUTE stands for the signal 0x0FFFF2 btw for signal 1048562
But i have problem to send the signal over the dev board. A roundtrip test (rerecording the data from esp to raspi) have a complete other hex lis. i.g.
KEY_MUTE 0x0FFFF2 => 1048562
KEY_MUTE 0x10000D => 1048589
here is my code *striped some lines:
the base bit was switch from 21 to 22
So, on this point totally clueless how to debug this shi*** .
so maybe the folk from here have some ideas.
esptest lirc.conf
"functioning lirc.conf"
I have an ai Thinker NodeMCU dev board connected with an Ir diode.
i collected with my raspberry and irrecord the specific key codes. My tests to controll my tv with these code over irsend is functioning (e.g. irsend SEND_ONCE philips KEY_MUTE)
*KEY_MUTE stands for the signal 0x0FFFF2 btw for signal 1048562
But i have problem to send the signal over the dev board. A roundtrip test (rerecording the data from esp to raspi) have a complete other hex lis. i.g.
KEY_MUTE 0x0FFFF2 => 1048562
KEY_MUTE 0x10000D => 1048589
here is my code *striped some lines:
Code: Select all
#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <ESP8266mDNS.h>
#include <IRremoteESP8266.h>
const char* ssid = "*";
const char* password = "*";
MDNSResponder mdns;
ESP8266WebServer server(80);
IRsend irsend(13);
void handleRoot() {
server.send(200, "text/html", "<html><body><a href=\"ir?code=0x0FFFF2&key=KEY_MUTE&int=1048562\">");
}
void handleIr(){
for (uint8_t i=0; i<server.args(); i++){
if(server.argName(i) == "int")
{
unsigned long code = server.arg(i).toInt();
int foo = server.arg(i).toInt();
// testing for the roundtrip
for(int i = 0; i < 10; i++) {
irsend.sendRC6(foo, 21);
delay(10);
Serial.println(foo);
}
}
}
handleRoot();
}
void handleNotFound(){
String message = "File Not Found\n\n";
message += "URI: ";
message += server.uri();
message += "\nMethod: ";
message += (server.method() == HTTP_GET)?"GET":"POST";
message += "\nArguments: ";
message += server.args();
message += "\n";
for (uint8_t i=0; i<server.args(); i++){
message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
}
server.send(404, "text/plain", message);
}
void setup(void){
irsend.begin();
Serial.begin(115200);
WiFi.begin(ssid, password);
Serial.println("");
// Wait for connection
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.print("Connected to ");
Serial.println(ssid);
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
if (mdns.begin("esp8266", WiFi.localIP())) {
Serial.println("MDNS responder started");
}
server.on("/", handleRoot);
server.on("/ir", handleIr);
server.on("/inline", [](){
server.send(200, "text/plain", "this works as well");
});
server.onNotFound(handleNotFound);
server.begin();
Serial.println("HTTP server started");
}
void loop(void){
server.handleClient();
}
the base bit was switch from 21 to 22
So, on this point totally clueless how to debug this shi*** .
so maybe the folk from here have some ideas.
esptest lirc.conf
Code: Select all
name esptest
bits 22
flags RC6|CONST_LENGTH
eps 30
aeps 100
header 2665 915
one 437 470
zero 437 470
gap 34528
min_repeat 9
# suppress_repeat 9
# uncomment to suppress unwanted repeats
toggle_bit_mask 0x3
rc6_mask 0x20000
begin codes
KEY_POWER 0x11000C
KEY_MUTE 0x10000D
KEY_ARCHIVE 0x1100CC
KEY_INFO 0x10000F
KEY_1 0x110001
KEY_2 0x110002
KEY_3 0x100003
KEY_4 0x110004
KEY_5 0x110005
KEY_6 0x100006
KEY_7 0x110007
KEY_8 0x100008
KEY_9 0x110009
KEY_0 0x110000
end codes
end remote
"functioning lirc.conf"
Code: Select all
begin remote
name philips
bits 21
flags RC6
eps 30
aeps 100
header 2658 911
one 431 457
zero 431 457
gap 83814
min_repeat 1
# suppress_repeat 1
# uncomment to suppress unwanted repeats
toggle_bit_mask 0x0
rc6_mask 0x10000
begin codes
KEY_0 0x0EFFFF
KEY_1 0x0EFFFE
KEY_2 0x0EFFFD
KEY_3 0x0FFFFC
KEY_4 0x0EFFFB
KEY_5 0x0EFFFA
KEY_6 0x0FFFF9
KEY_7 0x0EFFF8
KEY_8 0x0FFFF7
KEY_9 0x0EFFF6
KEY_MUTE 0x0FFFF2
KEY_ARCHIVE 0x0EFF33
KEY_INFO 0x0FFFF0
KEY_BACK 0x0EFFF5
KEY_MENU 0x0FFFAB
KEY_UP 0x0EFFA7
KEY_DOWN 0x0FFFA6
KEY_LEFT 0x0EFFA4
KEY_RIGHT 0x0FFFA5
KEY_VOLUMEDOWN 0x0EFFEE
KEY_VOLUMEUP 0x0EFFEF
KEY_CHANNELDOWN 0x0FFFDE
KEY_CHANNELUP 0x0FFFDF
KEY_OK 0x0FFFA3
KEY_RED 0x0EFF92
KEY_BLUE 0x0FFF8F
KEY_GREEN 0x0EFF91
KEY_YELLOW 0x0FFF90
KEY_OPEN 0x0FFFC7
KEY_POWER 0x0EFFF3
end codes
end remote
