unable to rename 'C:\Users\rajus\AppData\Local\Temp\arduino

Discuss here different C compiler set ups, and compiling executables for the ESP8266
 Reply

User avatar

unable to rename 'C:\Users\rajus\AppData\Local\Temp\arduino

By VSRKRAJU
- Sun Dec 24, 2017 10:22 pm #72683 Hi All,

while compiling following code I am getting this error and unable to resolve,
I tried to run this code in run as administrator and restarted the arudino IDE and os then tried but no luck...
please any one help us on this will be very helpful for me

Error:
Arduino: 1.8.4 (Windows 10), Board: "Generic ESP8266 Module, 80 MHz, 40MHz, DIO, 115200, 512K (64K SPIFFS), ck, Disabled, None"

C:\Users\rajus\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-ar: unable to rename 'C:\Users\rajus\AppData\Local\Temp\arduino_build_681184/arduino.ar'; reason: File exists

exit status 1
Error compiling for board Generic ESP8266 Module.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.


Code:
#include <ESP8266WiFi.h>

const char* ssid = "your-ssid";
const char* password = "your-password";

int ledPin = 2; // GPIO2
WiFiServer server(80);

void setup() {
Serial.begin(115200);
delay(10);


pinMode(ledPin, OUTPUT);
digitalWrite(ledPin, LOW);

// Connect to WiFi network
Serial.println();
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);

WiFi.begin(ssid, password);

while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");

// Start the server
server.begin();
Serial.println("Server started");

// Print the IP address
Serial.print("Use this URL to connect: ");
Serial.print("http://");
Serial.print(WiFi.localIP());
Serial.println("/");

}

void loop() {
// Check if a client has connected
WiFiClient client = server.available();
if (!client) {
return;
}

// Wait until the client sends some data
Serial.println("new client");
while(!client.available()){
delay(1);
}

// Read the first line of the request
String request = client.readStringUntil('\r');
Serial.println(request);
client.flush();

// Match the request

int value = LOW;
if (request.indexOf("/LED=ON") != -1) {
digitalWrite(ledPin, HIGH);
value = HIGH;
}
if (request.indexOf("/LED=OFF") != -1){
digitalWrite(ledPin, LOW);
value = LOW;
}

// Set ledPin according to the request
//digitalWrite(ledPin, value);


// Return the response
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println(""); // do not forget this one
client.println("<!DOCTYPE HTML>");
client.println("<html>");

client.print("Led pin is now: ");

if(value == HIGH) {
client.print("On");
} else {
client.print("Off");
}
client.println("<br><br>");
client.println("Click <a href=\"/LED=ON\">here</a> turn the LED on pin 2 ON<br>");
client.println("Click <a href=\"/LED=OFF\">here</a> turn the LED on pin 2 OFF<br>");
client.println("</html>");

delay(1);
Serial.println("Client disonnected");
Serial.println("");

}
User avatar

Re: unable to rename 'C:\Users\rajus\AppData\Local\Temp\ardu

By StrayDog
- Mon Jan 29, 2018 12:27 pm #73559 Experienced the same problem fot more than a week.
This is what I came up with, it's been TESTED and allows sketch to be compiled, on version 2.1.
However, it seems to raise another problem, on version 2.4.

1) Download/extract Arduino core for ESP8266 WiFi chip, Arduino-Master.zip.
2) Install into esp8266com folder, as by instructions, READ THE DOC.
3) Go to the Tools directiory, click on Get.py.

Install is complete.

Try to compile with your current configuration, if it works OK, if not try downgrading the Esp8266 version in the Board Manager, repeat until you get a successful compile.

Now I can't connect to WiFi, another problem.
 Reply
Return to Compiler Chat