- Sat Feb 09, 2019 6:40 pm
#80503
Just trying out new Wemos mini for project.
Gone through all install for Arduino IDE on Mac and installed USB to serial drivers, all went very well! Easy!
Yes, then uploaded the blink programme, worked no problems, well not quite.
The error window said that upload speed maybe too high, but it worked (Yay).
So next test wanted to upload program simple program that captures GPS serial signal and displays in serial box just to test GPS module with Wemos mini.
Now I have warning and errors!! see Below!
Uploading 230192 bytes from /var/folders/8_/h07t8n2j4z3djn414lrw_3g00000gp/T/arduino_build_750741/Raw_GPS.ino.bin to flash at 0x00000000
warning: espcomm_send_command: didn't receive command response
An error occurred while uploading the sketch
warning: espcomm_send_command(FLASH_DOWNLOAD_DATA) failed
warning: espcomm_send_command: wrong direction/command: 0x01 0x03, expected 0x01 0x04
error: espcomm_upload_mem failed
Any suggestions are greatly appreciated.
Many Thanks in advance.
Gone through all install for Arduino IDE on Mac and installed USB to serial drivers, all went very well! Easy!
Yes, then uploaded the blink programme, worked no problems, well not quite.
The error window said that upload speed maybe too high, but it worked (Yay).
So next test wanted to upload program simple program that captures GPS serial signal and displays in serial box just to test GPS module with Wemos mini.
Now I have warning and errors!! see Below!
Uploading 230192 bytes from /var/folders/8_/h07t8n2j4z3djn414lrw_3g00000gp/T/arduino_build_750741/Raw_GPS.ino.bin to flash at 0x00000000
warning: espcomm_send_command: didn't receive command response
An error occurred while uploading the sketch
warning: espcomm_send_command(FLASH_DOWNLOAD_DATA) failed
warning: espcomm_send_command: wrong direction/command: 0x01 0x03, expected 0x01 0x04
error: espcomm_upload_mem failed
Any suggestions are greatly appreciated.
Many Thanks in advance.
