- Mon Aug 03, 2015 10:29 pm
#24948
I'm very excited to finally be able to control my wemo switches with the esp8266. Below is the code I used for. It is just a simple example, need to add a button and filter the response from the switch to check the wemo status. ar
Hoping to hear some feedback and improvements from you guys.
Hoping to hear some feedback and improvements from you guys.
Code: Select all
--------------------------------------------------------------------
/*
* This sketch sends data via HTTP POST requests to a wemo device.
*
*
*/
#include <ESP8266WiFi.h>
const char* ssid = "Your_Wifi";
const char* password = "Your_password";
const char* host = "192.168.0.179";
const int port = 49153;
int wemo_status = 0;
String wemo_on="<s:Envelope xmlns:s=\"http://schemas.xmlsoap.org/soap/envelope/\" s:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\"><s:Body><u:SetBinaryState xmlns:u=\"urn:Belkin:service:basicevent:1\"><BinaryState>1</BinaryState></u:SetBinaryState></s:Body></s:Envelope>";
String wemo_off="<s:Envelope xmlns:s=\"http://schemas.xmlsoap.org/soap/envelope/\" s:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\"><s:Body><u:SetBinaryState xmlns:u=\"urn:Belkin:service:basicevent:1\"><BinaryState>0</BinaryState></u:SetBinaryState></s:Body></s:Envelope>";
void setup() {
Serial.begin(115200);
delay(10);
// We start by connecting to a WiFi network
Serial.println();
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
}
void loop() {
if (wemo_status == 0) {
wemo_status = 1;
Serial.println("Turning WeMo On...");
}
else {
wemo_status = 0;
Serial.println("Turning WeMo Off...");
}
Serial.println();
wemo_control(wemo_status);
delay(5000);
}
void wemo_control(int cmd) {
Serial.print("Connecting to ");
Serial.println(host);
// Use WiFiClient class to create TCP connections
WiFiClient client;
if (!client.connect(host, port)) {
Serial.println("Connection failed");
return;
}
// This will send the request to the server
client.println("POST /upnp/control/basicevent1 HTTP/1.1");
client.println("Host: " + String(host) + ":" + String(port));
client.println("User-Agent: ESP8266/1.0");
client.println("Connection: close");
client.println("Content-type: text/xml; charset=\"utf-8\"");
client.print("Content-Length: ");
if (cmd == 1) {
client.println(wemo_on.length()); // both wemo_on and wemo_off are the same length, just in case it changes in the future
}
else {
client.println(wemo_off.length());
}
client.println("SOAPACTION: \"urn:Belkin:service:basicevent:1#SetBinaryState\"");
client.println();
if (cmd == 1) {
client.println(wemo_on);
}
else {
client.println(wemo_off);
}
delay(10);
// Read all the lines of the reply from server and print them to Serial
while(client.available()){
String line = client.readStringUntil('\r');
Serial.print(line);
}
Serial.println();
Serial.println("Closing connection");
}
--------------------------------------------------------------------
I used the following sites to help me reach the outcome.
WeMo Hacking - http://mattenoble.com/2013/08/07/wemo-hacking/
Working HTTP POST example - http://forum.arduino.cc/index.php?topic=155218.0
an-Piet Mens :: Sonos pause switch - http://jpmens.net/2010/03/16/sonos-pause-switch/
