ESP8266 Community Forum

- Wed Feb 11, 2015 11:40 pm #9527 It seems you are using the new API, where the code has been moved to its own ws2812 module, but are running an old precompiled firmware, where it was added to the gpio module.

So either flash the firmware from this post http://dangerousprototypes.com/forum/vi ... =56&t=7026
or change the Lua code from ws2812.write(...) to gpio.ws2812(...)

- Thu Feb 12, 2015 2:27 am #9533 Will check that out, thanks!

- Thu Feb 12, 2015 4:16 pm #9583 I've tried both ws2812.write(...) and gpio.ws2812.write(...), neither seem to be working with the latest pre_build.

i'm also getting [attempt to call global 'ws2812' (a nil value)] error.

has ws2812 been added to the latest pre_build?

- Thu Feb 12, 2015 4:25 pm #9584 Either use
* the firmware from this thread and gpio.ws2812()
* the firmware from this post http://dangerousprototypes.com/forum/vi ... =56&t=7026 and ws2812.write()
* wait, until the dev branch is merged into the master branch, and use the official pre-compiled firmware with ws2812.write()